iTuneDVR

Open remote access for me to your IPC! I'll see.

Write me to e-mail and describe your current situation. At the forum too much written !!! Give me a full remote access to your IPC: set by it directly or if it is behind a router to address IPC place in the DMZ I'll see. Whats the email ? Check your e-mail!

Write me to e-mail and describe your current situation. At the forum too much written !!! Give me a full remote access to your IPC: set by it directly or if it is behind a router to address IPC place in the DMZ I'll see.

Deffender666! Thanks! Russian always lend a helping hand to all those who got in trouble and who ask for personal assistance is not looking for no benefit. Of course, this can not be about money. However, I do not have to bail out all because of their carelessness, stupidity and greed. Chinese technique always and only with the Chinese language!!! And besides, as a rule immediately clear whether or not to help, and from whom do not need to carry on a conversation and do something even for money!

Make login screenshot!

Upgrade your IPC another firmware. General_IPC-HX3(2)XXX_Eng_P_V2.210.0001.0.R.20130517.bin General_IPC-HX3(2)XXX_Eng_P_V2.211.0000.0.R.20130726.bin General_IPC-HX3(2)XXX_Eng_P_V2.212.0001.0.R.20131224.bin .... If your problem will not corrected, then we will thinking.

You do not carefully read the upper posts! Only works in 5.2.0. In 5.1.6 it is necessary to study in detail the issue.

The main question is not how will you find the firmware. I gave an example of a common firmware for Series (3) 2XXX. It is possible to change and update your IPC. Maybe it will work!

You have the latest official! But maybe if correct General_IPC-HX3(2)XXX_Eng_P_XXXXXXXXX maybe .....

It's new IPC from Hikvision? What's firmware version? Screenshot better!

Make menu screenshots. Login, Firmware version, etc.

Wide smile! In Russina on exhibition MIPS-2014, i already saw DVR with this menu. This HDCVR DVR. I have a Skype contact the director of this company, which I saw at the show is the same menu. I asked him and he gave me a link to the manufacturer. In Russia it is sold as a DVR DT-HCVR04227 http://www.divitec.ru/product/hdcvi-videoregistrator-divitec-dt-hcvr04227/ Manufactuter is NIHON http://www.zxnihon.com/detail.asp?id=622 Use china site version in chrome browser with translation!

Make login screenshot!

Сheck the connectors on the DVR. Most likely somewhere whiling away the central core and ground. It is also possible problems with any voltage.

You just do not know how to do it. That's all. And what is expressed in a significant difference in your opinion between the two chambers with different firmware?

You do not have to wait for the firmware from the distributor, and download the part of firmware directly from your IP camera. Then, in general it will be clear what the difference between the firmware.

There is screenshot???

Could you clarify these questions before you commit such a purchase?

In original chinese version on the same IPC # showServer Enable: 1 LBS dev.ys7.com:8555 DAS 183.136.184.7:6805 MSG invalid NTP 210.72.145.44:123 ALARM alarm.ezviz7.com:7400 STUN_1 183.136.184.7:6002 STUN_2 183.136.184.3:6003 After # setLBS dev.ezviz7.com:8555 set lbs server success # showServer Enable: 1 LBS dev.ezviz7.com:8555 DAS 183.136.184.7:6805 MSG invalid NTP 210.72.145.44:123 ALARM alarm.ezviz7.com:7400 STUN_1 183.136.184.7:6002 STUN_2 183.136.184.3:6003 # showServer Enable: 1 LBS dev.ezviz7.com:8555 DAS 107.21.63.234:6801 MSG invalid NTP 210.72.145.44:123 ALARM alarm.ezviz7.com:7400 STUN_1 183.136.184.7:6002 STUN_2 183.136.184.3:6003 #

Why spamming your question in all branches forums? Take a screenshot of the menu of your DVR and then it will be clear that you have a toy.

By the way! In the European version of the IPC on the menu one, and in the Chinese version of the IPC, a little more!

teknologs Good job! It's not realy hacked, but very smartly tuned!!! setFtpService - just list the prompt! # setFtpService Commands Usage help : Printf the command usage list getIp : Get the device's IP address setIp : Set the device's IP address. Usage: setIp [IP ADDRESS]:[SUBNET MASK] e.g. setIp 192.168.1.10:255.255.255.0 setPort : Set the device's command PORT Usage: setPort [PORT NUMBER] e.g. setPort 8000 setGateway: Set the device's gateway Usage: setGateway [GATEWAY ADDRESS] e.g. setGateway 192.168.1.1 setPacketType: Set the stream packet type Usage: setPacketType [PACKET TYPE] e.g. setPacketType ps; setPacketType rtp getRtpLen : Get the main stream rtp packet length. setRtpLen : Set the main stream rtp packet length. Usage: setRtpLen [packet len]. e.g. setRtpLen 1000. setDebug : Set debug parm. e.g. setDebug -l 2 -m rtsp -d 111 setDebug -h getDebug : Get debug parm. e.g. getDebug getDebug -h debugLog : Print all debuginfo before. e.g. debugLog debugLog -h setV6ip : Set the device's IP address Usage: setIp [IP ADDRESS]/[SUBNET LEN] e.g. setIp 2000:1:2:3:4:5:6:7/64 getAgingMode : Get the aging mode. setAgingMode : Set the aging mode. Usage: setAgingMode [aging mode]. e.g. setAgingMode 1. getAgingTime : Get the aging time. setAgingTime : Set the aging time. Usage: setAgingTime [aging time]. e.g. setAgingTime 60. setIrcmd : Set the IR PWM value(0-100) Usage: setIrcmd [near] [mid] [far] e.g. setIrcmd 100 100 100 setRectFrame: Set the autotrack rectangle frame. Usage: setRectFrame [ENABLE]. e.g. setRectFrame 1. getIrstate : Get the IR PWM value(0-100) getMcuInfo : Get the information of Mcu setFtpService : Set ftp service state.(start/stop). setItsMode : Restart ITS lib after changing scene. Usage: setItsMo de [ENABLE](0/1). InquireFanSwitch: send Laser Cmd. e.g. InquireFanSwitch . StartLaser: Start Laser. CloseLaser: Close Laser. LaserMotReset: Reset Motor of Laser. EnlargeCur: Enlarge electric current of Laser. ReduceCur: Reduce electric current of Laser. SetCur: Set electric current of Laser.(0~255) e.g. SetCur 150. LaserMotDirect: Set Motor Direct of Laser.(1~36) e.g. LaserMotDirect 36. LaserTeleOffset:Tele Offset.(0~255) e.g. LaserTeleOffset 150. setLaserMode:setLaserMode (0-auto,1-mannual. e.g. setLaserMode 1. getLaserMode:Laser control mode is 0 (0-auto, 1-mannual) e.g. getLaserMode. LaserWideOffset:Wide Offset.(0~255) e.g. LaserWideOffset 150. InqSwitch: Inquiry Switch of Laser. InqCurrent: Inquiry Current of Laser. InqCurMotDirect: Inquiry Current Motor Direct of Laser. setIrMode:setIrMode (0-auto,1-mannual. e.g. setIrMode 1. getIrMode:Ir control mode is 0 (0-auto, 1-mannual) e.g. getIrMode. ******************************************************************************** *** showKey : Get all the keys of civil platform showServer : Get all the servers of civil platform showUpnp : Get the local and nat port and address showStatus : Get the device status of civil platform showDefence : Get the defence plan setLBS : set the lbs address, e.g. setLBS 123.1.1.1 or set dev.ys7.com:8555 setAlarm : set the alarmserver address. Usage as setLBS setWlan: : set the wifi ssid, just for test config. Usage: setWlan SSID setdefence : Set the defence plan Usage: setDefence [enable:1] [day:*] [start:hh:mm] [end:hh:mm] e.g. setDefence enable:1 day:3 start:7:30 end:13:0 ******************************************************************************** *** In 5.2.0 #setLBS dev.ezviz7.com:8555 # showServer Enable: 1 LBS dev.ezviz7.com:8555 DAS 107.21.63.234:6801 MSG invalid NTP 210.72.145.44:123 ALARM invalid STUN_1 stun1.ezviz7.com:6003 STUN_2 stun2.ezviz7.com:6004 In 5.1.6 after tined setLBS # showServer LBS dev.ezviz7.com:8555 DAS invalid MSG invalid NTP 210.72.145.44:123 ALARM alarm.ezviz7.com:7400 STUN_1 invalid STUN_2 invalid I tried to configure this in 5.1.6 and 5.2.0. But only 5.2.0 is a menu with EZVIZ. Probably will have to force to resolve it in 5.1.6, to display a menu, and perhaps in others too it works.

It's look like this http://item.taobao.com/item.htm?id=18636299297 Is not it? Make login screenshot!

Make a screenshot S.M.A.R.T. disk status in your DVR! Use MHDD to test disk in PC in DOS.

I also have a great sense of humor and use it and answer. There is nothing better than to spend fun and a huge advantage in the search for the time and research the answers to this question. I'm not some Linux guru, which is only available. I am a simple and ordinary man, same as everyone do his favorite thing that gives me the joy of one continuous research on information technology and not only that. So I can not deny anyone the same joy and happiness from independent studies and research! You will be a storm of emotions and indispensable as a result of the success! For personal use, you do it yourself, and if it is necessary for business purposes, it offers a welcome simply agree to cooperate on mutually beneficial terms! And so I was not accused of being greedy and I do not want to share information, that some time ago, I shared the secrets of Dahua Technology with the hero of this forum and my English friend CBX! Friends always help each other because they are friends! Here is a mysterious Russian soul! Always help the wise advice, if asked for help, and does not impose his views to others and teach them how to live and how to breathe!