iTuneDVR

Make several photos from your DVR: login screen, DVR version and firmware screen!

No, but you can use TFTP and downgrade youself!

Downgrading 5.2.0 -> 5.16 works. Checked! PC LAN CARD IP=192.0.0.64 RUN HIKVISION TFTP with digicap.dav in directory IPC POWER ON READ message in window CLOSE TFTP after success messages. Reboot IPC Besides, I made ​​a custom firmware that reduces the version from 5.2.0 to 5.1.6, which can be used in the web interface. Checked!

The same processor Hi3520D. Different in appearance. DS-7108SN / P - pure Chinese version DS-7604 ( SN / P - purely European version I do not presume to spread freely available English or Russian version of the firmware DS-7108SN/P!

Have you tried it out and noticed any differences? I do not have such an NVR, but I disassembled both firmware and compared their part. Multiple differences: the kernel, the core application hicore, web component player. It makes sense to update and view

The latest DS-76xxNI-SE(P)_USA_Firmware_v2.3.9_140704_Beta.zip

Thanks! But i'm already downloaded all from this ftp recently. I just did not pay attention to it!

I have the latest available, but it is clear that since December 2013 have passed a lot of time and should be fresh firmware. Where can I download this firmware?

It seems to me that is the latest firmware! I thought that Hick has long realized that what you are looking for! But there is nothing wrong to adjust the camera separately, although the same manufacturer should be sequentially setting devices. But maybe you just have not found this item WDR?

It's my pleasure! What is your NVR model and firmware?

Hi! The answer on your question is in your post! 192.168.1.11 - is external IP of NVR 192.168.254.2 - is internal IP of POE NVR SWITH. ONLY INTERNAL!!! There is no routing between these interfaces. Try to upgrade NVR firmware or use external POE SWITCH. Use the same subnet address in IPC 192.168.1.XXX!

Don't forget close TFTP Server after finish message!

You mean davinci path? For what? it's useless and not cool! Although it is possible to find a similar place in the code is not difficult, but it is better to support the decision of the CBX! Buy CBX utility, and forget about all forever

You mean davinci path? For what? Use CBX utility, and forget about all

You should refer to the CBX

PC ethernet card IP=192.0.0.128 Start up Hikvision TFTP Server with digicap.dav file in directory. Connect IPC to you network or PC. Power on IPC. (Defalt IPC IP=192.0.0.64) Look In TFTP window and you will see some messages! Don't forget close TFTP Server after finish message!

Of course myself! Chinese NVR only with the Chinese language on NVR and eglish on the web-interface. Other original firmware is not present! I made several solutions for this NVR. - Change the regional code in soldering flash and without it. Protected MTD block - Make a custom firmware with the English language; - Make a custom firmware with the Russian language; http://vk.com/album221982133_199899067

CBX! Its very good news for you and for me Keep it up! My Chines DS-2CD3332-I only on pure Russian

You no need PSS fo this. Tune FileZilla server on your PC and tune FTP backup on your DVR. There in a software Remote Backap for Dahua too! That's all!

Oops! My mistake. Of course in 5.1.6 140612 code is DC C0 9D E5 49 00 00 1A-0B 00 5C E1 47 00 00 1A DC C0 9D E5 00 00 00 1A-0B 00 5C E1 00 00 00 00 There in one the same code. But why doesnt work i don't know! Да мог бы сразу по русски написать и не парить мозг Другого такого же места я не нашёл! Если в 5.0.2 хватало того патча, а его я расписал, что это такое, то почему не айс - непонятно!

You need TTL-RS232 adapter, null modem cable, PC with real COM port, hyperterminal, TFTP server and knowledge On the Internet a lot of instructions on how to restore Dahua TFTP!

Maybe there is some misunderstanding of the situation!!! NAS patch for raptor 5.1.6 140612!!! D4 C0 9D E5 2C ... - 5.0.2 in my screenshot DC C0 9D E5 .... - 5.1.6 140612 The algorithm in the program of transition to two error-handling routine event. The patch removes them and nothing more. How should work really unknown. I found just the place, which was considered to have 5.0.X and what to look for 5.1.6. More screenshots of the same! Follow the red line 5.0.2 5.1.6

It was one of similar locations in the code. If you did everything right and did not work, we will look further!

For me to find a similar place was not that difficult with the previous search pattern. If you can test this patch, then write about it please! For myself, I did it as a custom firmware. This firmware, I do not give to share.

Hi! Sometimes there are problems with hosting, but then it works! Photos that did not watch the same ones I posted on this forum. Apparently you have to register on my forum and then screenshots will be available! I'm sorry, but I have on the forum all in Russian;)