fullmonty

Hi could somebody please help I'm trying to get the menu on my ptz camera using my dvr (iris) All the leads are right and pushed in, It worked fine untill iv change the pelco from D to P Iv take some photos, just to show you what I mean There are no dip switches on this ptz all done using the dvr, Iv also preset 95 OSD but that not working also Many thanks

Hello Again, is it possible if I use team viewer someone could help me get my ptz menu to work using the nvsip website? as iv tried all day yesterday and today, please let me know by pm pls

ok iv just tryed that and nothing happened, this is what I did, I went into the device dvr then ptz the preset 64 / 54 then went to the ptz / more (in there I have Aux open / Aux close) and preset and goto / patrol i click on Aux Open, then preset 64 / ESC / and click Iris (+) and nothing, i don't have a joy stick only the mouse my camera is made by maxx digital Model: MDV-PTZ-MSDE Thank for looking

Thanks for that I will give it ago tomorrow and report back Thanks again

thanks for that, love to buy one, but iv only got around £150 - £200 to spend.

hi, im looking to buy a PTZ outside cam, But iv seen some that have 700TVL and Some with 500TVL and also D1, 960H is D1 better them the 700TVL? also are Sony Effio-E anygood? this is a spec from one I was thinking of getting Image Sensor - 1/3" Sony Effio-E Super HAD II CCD Horizontal Resolution - 700TVL CCD - Sony Effio-E Pixels - PAL: 976(H) x 494(V) TV System - PAL/NTSC Lens - 5mm to 60mm (12X Zoom) Illumination - 0.001 LUX S/N Ratio - ≥65dB (AGC OFF) Gamme Correction - 0.45 Video Out - 1.0VP-P, 75Ω Scanning System - PAL: 625 Lines Electronic Shutter Time - PAL: 1/50-1/100,000/sec (Auto) Operation Temperature - -10℃ - +50℃ Storage Temperature - -20℃ - +60℃ White Balance - Auto Power Source - DC12V 700mA Dimensions - 138mm x 212mm Weight - 3kg

thank you for getting back in touch, yes I just notice the BNC and not the RG45 connector, are IP cam Better then Analog? and what you someone like to recommend me iv got €185 / £150 / $252 thanks Nic

Hello Forum, this is my 1st post I hope someone could answer my problem.. here we go I would like to buy a ip speed dome cam for outside use, the one a have seen as 3 leads power / bnc / 2 wires what I would like to do is use a RJ45 cable from the bnc to put into my router or do I need a dvr or nvr to plug in the back so recored and view on my iPhone any help would be great Nic

So would this work?

i have just find this DVR-DV9314LV (Economic) I hope that helps

That's great so would this work on any ptz I'm thinking about getting this one. As you can see the connections also the spec So I need a video Power & Video CAT5/6 Video Balun then I can plug into a drv or nas then into my router,? I hope iv got that right and is a good ptz camera to buy Effective Pixels 976X582 Lens 12X Optical Zoom (5~60mm) Focal 5mm to 60mm Min.Object Distance 10mm~1000mm (wide~tele) Minimum Illumination 0.2Lux/F1.6(color); 0.02Lux/F1.6(B/W) Electronic Shutter PAL:1/1~1/30000s Day/Night Auto (ICR) / Color B/W ATR YES Backlight OFF/ON/BLC/HLC 2D-NR OFF/ON (Y/C level) S/N RATIO >65db (AGC Off) Analog Video Output BNC(1.0Vp-p / 75_), PAL / NTSC Video Video Output 1ch BNC Resolution 700TVL Sony Effio-E Frame Rate PAL: 25fps, NTSC: 30fps Dome Drive Pan/Tilt Range Horizontal: 0°~360° endless, Vertical: 0°~90° Manual Control Speed Horizontal: 0.1°~80°/s, Vertical: 0.1°~80°/s Preset Speed Horizontal: 80°/s, Vertical: 80°/s Preset 16 PTZ Mode YES Speed Setup Human-oriented focal Length/ speed adaptation Info Display Time, Location, Dome title, Dome coordinates, Alarm, and etc. Power Up Action Auto restore to previous PTZ and lens status after power failure Idle Motion Activate preset/scan/tour/ patter if there is no command in the speci_ed period. Time Task Auto activation of Preset by preset-time Alarm Preset/Pattern output Protocol RS485, Pelco-P/D, Auto recognition of general protocols General Power Supply AC 12V/1A(±10%) Material Plastic Power Consumption 10W Working Humidity <90% Protection Level IP66 Option ___ Wall & Ceiling Support Dimension ___ ф138(mm) x 266(mm) Weight 700g Thanks for your help