celnut

I bought 2 cheap Chinese ptz ip cameras - C-p05(EN)C -, they worked ok for a while but now some of the functions don't, tilt works ok but pan does not, also auto tracking stopped working it is exactly the same for both cameras so I suspect it is the software/firmware that has gone wrong, I have no reply from the seller so I can't get any help from them they are cloud based using the YCC365 Plus app has anyone else had any of these and had the same problem?

I thought I would upgrade my Swann analogue DVR to an NVR, so I bought a Sannce, Model No - N48PBE, but I'm not too happy with this system it's lacking a lot of functions can anyone recommend a decent not too expensive NVR system?

aren't TVT systems Chinese (Shenzhen)? I'm in Rotherham

ok, I now have an unlimited budget, what's your recommendation?

ok. I now have an unlimited budget, so what's your recommendation?

I've had a look round google and it seems the Hikvision range are most popular I need an 8 camera system with PoE and possibly room for more cameras in the future, but unsure which model to go for anyone tried and found a good model?

looking on google, it seems the Amcrest range are pretty decent anyone tried them?

ok, what's your recommendation

hi, 6 cameras, £400

I didn't subscribe to the cloud, just let the free 1 month run down, I don't like cloud based cameras because if the internet connection goes down then I don't have access can you recommend an ip PTZ that is not cloud based?

Hi, I bought a PTZ dome from china, it states that it is a Sony 9600-1. I don't need the camera to switch to night mode as there is plenty of light and the IR triggers the other cameras when it is on guard tour, so I switched it to day mode by calling preset 83, but when I start the tour or A-B scan it switches back to night mode. Any ideas?

Ok, so I go into the camera menu and go down to 'Dome' - main menu -------------------------- System - Dome Camera Language Display Reset Exit then down to 'I R Display' - main menu -------------------------- Comm - I R Display Guard Tours A = B Scan Pan Scan Park Action Privacy Zone Advanced Exit now I've got 'Working Mode' - main menu -------------------------- - Working Mode Auto Testing Time 08S Output Power 100 Illumination 02 Ambient Light 50 I R Switch Zoom 07 Exit enter edit mode and the curser changes to a '>', now I have 3 choices main menu -------------------------- > Working Mode Auto Testing Time 08S Output Power 100 Illumination 02 Ambient Light 50 I R Switch Zoom 07 Exit it's dark and I choose 'Off' and the camera indeed changes to colour (no IR) - main menu -------------------------- > Working Mode Off Testing Time 08S Output Power 100 Illumination 02 Ambient Light 50 I R Switch Zoom 07 Exit I go down to 'Exit' and come out of the OSD - main menu -------------------------- Working Mode Auto Testing Time 08S Output Power 100 Illumination 02 Ambient Light 50 I R Switch Zoom 07 - Exit the camera remains in day (colour) mode until I start a tour or move the camera, then if I go into the OSD menu again, I see the Working Mode has reverted back to 'Auto'

I'll post some pictures of the menus if the moderators allow it, and show what I've tried

Hi. When you exit the PTZ menu .........did you just exit or did you go down the menu to save/exit hi, there is no option to save from the menu

Hi, I have a Swann DVR8-4000 system with a PTZ camera, I have set up the presets and a patrol, it works ok, according to the manual I should be able to set up additional patrols but cannot find how to do this, can anyone help?

hi I bought a couple of CAM-PTZ-902-SSG cameras from Abancctv and hooked them up to my Swann DVR8-4000, they both work with the pan tilt and zoom etc. however, one of them I can set the presets up ok but the other does not seem to accept the presets. also the one that I have managed to set the presets up on, will not set up a patrol setting. any ideas anyone?

I sorted it the patrol problem was because I did not enter all the different presets separately, thats ok now. the second problem was that the camera would reboot when trying to set the presets. I found this to be the voltage drop as the camera tried to pan and re focus on pressing set. the extension lead was quite long so I shortened it and now the camera is accepting the presets. hope this is of some help to anyone with similar problems