fullpwr

Just bought a Floureon dvr/nvr combo,got every thing set up and working great with analog and ip cameras together.One problem I set up port forwarding and etc and only getting 6 fps on the mobile view.It appears the substream settings only allow a max of 6 fps.Am I looking at or doing something wrong as my 3 year old Zmodo 8 channel DVR could easily attain 25fps when I was on mobile view as I have a 50 Meg connection

Purchased a NVR7004S (4 channel nvr) Unknown Chinese brand,seller will not reply and I am stuck.I've tried the typical passwords and left blank,no luck

Yes tried leaving blank,I thought maybe if I posted the pictures up here somebody might recognize it and might know cuz I've tried a lot of the normal defaults and they're not working

Yes I am in USA,Mo to be exact,I have not tried the composite out (don't need it anyway) but vga works fine,seller is very shifty,using profanity and saying I'm a retard that doesn't know about nvr's and he will not accept return because he is a "cctv master"lol.He swore up and down they were fine (famous last words)and was selling as-is because of item nature.It boots up with splash screen,then shows 4 way view (no cams obviously) then when I try to access menu or functions it brings up a password prompt like any other DVR or NVR it has admin as the user and then any password I've tried says invalid password hInt default pas

Purchased a NVR7004S (4 channel nvr) Unknown Chinese brand,seller will not reply and I am stuck.I've tried the typical passwords and left blank,no luck

yeah tried those with no luck,bought it under "as-is" terms and I'm finding out why I guess.The prompt says invalid password when I enter and hint says default pas,so I don't know if maybe someone changed it and left the hint the same,I am unable to figure out how to get the unit back to defaults,pins to short or no reset button visible inside or out

Just picked up a surplus Philips LTC0828/26 Autodome G3 camera.I can't seem to find proper documentation on setting the dips and rs485 communication.Everything I find is for newer (Bosch) Domes that have a 4 switch setup while mine has 8.If anyone can tell me the dip settings or if I need a RS232 to 485 converter or what I need to get the ptz going on this thing it would be great.If its any help the bootscreen says "Philips Autodome G3" "2002"

okay found my issue and will post in case someone else needs info.The older Bosch/Philips Autodomes run on a "Bi-Phase" connection so you either need a Bi-Phase to (your protocol) converter around $300 or luck out like I did and find an actual Bosch keyboard and Bi-Phase translator (I acquired both for $125) though my Dvr will not control the camera I at least have separate controls.These cameras are popping up on Ebay extremely cheap but if you buy a couple like I did make sure you know what you are getting into with additional equipment investments!

Just picked up a surplus Philips LTC0828/26 Autodome G3 camera.I can't seem to find proper documentation on setting the dips and rs485 communication or is this proprietary?.Everything I find is for newer (Bosch) Domes that have a 4 switch setup while mine has 8.If anyone can tell me the dip settings or if I need a converter or what I need to get the ptz going on this thing it would be great.If its any help the bootscreen says "Philips Autodome G3" "2002".I tried setting up using the bosch settings hoping that the similarities would work,there is a light inside that flashes (acknowledging data I assume) when I try to spin it but it doesn't move under any protocol I tried.It does spin up and home on boot so the drive seems okay