jazzar

I can provide schematic type .DWG files using autocad. Provide me with a rough sketch and the info you want on the site name ie project number etc. Can do this in my spare time for a reasonable hourly cost.

Nothing wrong in physicaly masking off the area. Vould use a camera that has privacy masking as a feature.

This can be a number of things primarily the security levels of windows 7. In past i have had to set up active x to run as unsecured ie minimum restrictions to get the active x components to load Also set ip address in as a trusted site. Possibly use f12 on internet explorer and set to run im emulation mode of ie8 etc And even set the ip address as a trusted site under java controls . Windows 7 is most likely causing the issue. Try googling each of the above.

Try googling monitor wall server. These will do the task of the presenting video to the multiple monitors. Available with different numbers of outputs from 4 to 16. Maybe worth looking at.

see ptz setup on quantum menu:- http://www.owlsecurity.co.uk/Quantum%20HD%20Manual.pdf link the two wires on rear of the quantum unit. set camera protocol & speed on the camera unit probably via dipswitches. they should then communicate.

From manual:- see attached to set the limits.

this any help:- https://www.samsungsv.com/Download/SDS-P3040_User_Manual.pdf pages 59 to 69 shows ports and DDNS. ONLY USING PORT 80 FOR WEB BROWSER 4520 - 4524 For Tcp 8000 - 8160 For Udp

have you tried:- http://qvisglobal.com/knowledge-base/support-section-manuals contact info and download manuals

Once port forward service set up then set up Firewall rule to allow access to the new service:- see:- https://kb.netgear.com/8219/How-to-setup-Inbound-Outbound-firewall-rules-on-NETGEAR-Modem-router-gateways once done check if port is open via canyouseeme.org

you usually have to create a new service with the port number and also allow it permission through the firewall. use canyouseeme.org from a pc connected to your router - input port number to test.

Fan is for cooling. If you remove the cooling then the psu could overheat resulting in component failure of the psu.

there are some drives specifically designed for constant read write as opposed to a pc which will generally have a long rest period when you switch off and go home from work etc. see;- https://www.wdc.com/en-gb/products/internal-storage/wd-purple.html?cid=goog:ppc:phase2:wdpurple:ic:purp western digital purple.

hi dude- you need to give a bit more info. for example if I hit you with:- My car lights don't work - what fuse should I check- people wont bother - too vague and lazy.

get a sample of the good quality cable along with the spec and then google and research- quality usually costs money- you want a good %copper screening- you can get 90% or so with double screen etc for military, avoid steel centre core- should be 100% copper- a lot of cheap nasty stuff out there.

Samsung do an ip network recorder with built in Poe 16 channel unit- so you don't need a separate switch. If you use IP systems. Cost effective.