ateu

My first Mini NVR from escam is in the same condition: power light on, usb is powered but dont read anything, no LAN connection (only few blinks on lan port) and logo screen for ~4 seconds. Mike Mahon: if nvr is bricked that cant read flash recovery: 1. is there any chance to TFTP some recovery file? 2. or maybe at least there is possibility to make serial connection by cable and recover? Please help!

Exactly same problem that i had -even after correct settings - it didnt save it. And the reason i tried flashing new firmware.

And here is my bricked nvr: Almost identical - but one chip is different. Probably its my fault and i did something wrong - but my nvr dont read usb flash any more and dont have active lan port. MindrustUK - if you can give me some more info (links?) about serial connection and what to do next - i can try. Edit: and here is my bootlogo (original from the beginning till now) - it lasts for 2 seconds.

I cant connect via telnet couse nvr need to boot to state with active lan port -it needs tcp/ip protocol to connect via LAN. But after few blinks (for about 2 seconds it is pingable at 192.168.1.188) but then LAN port is not active. Tried even tftp (used to unbrick routers) -no response. Probably only serial connection is possible via pins on mainboard -but dont have time for that

Thanks GhostRider! But it looks like i bricked my nvr completly before trying your files Now it dosnt even boot from USB, only short bootlogo, few blinks from lan port and no other signs of life. Probably only serial connection left - usb ports dont read flashdrive, lan port not working BTW: are you satisfied with this NVR? Everything works fine? Can you recommend it? Couse if i cant recover mine - i'll buy another unit. Thanks for help!

Hello! Signed here couse bricked my nvr too It boots up with USB recovery disk (thanks systpro for link) but when i select .update file it says "wrong file"... Edit: it accepted update file, updated ok - but after reboot still nothing, no video signal, lan not blinking. Should i wait all night or something is wrong? Can someone post more firmwares/update files? And maybe repost with telnet recovery files couse links doesnt work anymore. Thanks for help!