Thanks for the reply.
You're correct, it's the same in Enterprise. I already configured the settings you mentioned in your post, but had no luck. If I launch the smart client and select the camera I can hear the audio just fine during the live view, but when I trigger a recording there is no audio included in the playback.
Just to review here is what I did in the Management Application:
Expanded Advanced Settings
Expanded Cameras and Storage Information
Right-clicked the camera in question, chose properties
Select the Audio section under the camera Properties
Selected the P8221 as the default mic
Next, I selected the actions for the mic
Expanded Advanced Settings
Expanded Microphones
Selected the mic set as the default in the camera properties above
Right-clicked the mic and selected properties
Checked the enabled box
Under the recording settings, chose the option Follow Video
I will mention I haven't tried setting the recording settings option to always yet-I will try that tomorrow when I get a chance.
Any other suggestions?