linix86

thank you very much, I solved, thanks

Hello, I have a nvr Hikvision 7616ni-se/8p and would like to know how to access the individual cam to change values day / night and the like. Unfortunately I can only access NVR while the cam no because the poe ip class goes on a different and you can not set the same class ip between nvr and poe

up

Hello, I have an analog video surveillance system with DVR ganz and use the dms software for viewing. I also have a video surveillance system with ip nvr Hikvision and Use IVMS 4200. I would like to know if it is possible to view all cameras with a single software. The whole plant is local and I do not need to put it in remote

Hello, I would like to buy a nvr Hikvision DS-7616NI-SE/P and I would ask if I can record at 1080p on 10 channels simultaneously

Hi, as the title suggests I would like to know if there is a nvr Hikvision or other brand that has the ability to turn off the cameras and turn on via a command sent on the I / O contacts

Thank to all, the firmware indicated above it has been very helpful to also update other cameras in my possession. Thanks so much

Good evening, I received two DS-2CD2032-I from the China, each with firmware 5.2.0. One of the two is multilanguage while the other is only Chinese despite each are 5.2.0. How can I make become multilanguage the 5.2.0 Chinese ?I knew you could not change the 5.2.0 in multilanguage This is a screen of 2cd2032-1 Chinese with 5.2.0

I would like to bring the language to English or even Italian if possible. Now mount the firmware 5.1.6 Chinese. How should I proceed? I install the European firmware 5.1.6 and later proceed with the hack? Where can I find the European firmware 5.1.6?

Good morning, I received a bullet Hikvision DS-2CD2032-I with the Chinese firmware. I would like to know if I can install the 5.1.2 European smoothly or if I should install a firmware Chinese. greetings