dirosa

Hi GhostRider, thanks for the preceding description. The flashing will repeat one more time. Only the "resource busy" is suspected to affect the flash. There are no further messages failed. In writing 99%, there is no error message expliziede

H GhostRider, I came on. With the program puttytel.exe I get access to assuming 192.168.1.188. The mini NVR booted but only if the USB stick is prepared with the Startup Files "repair broken XVision XRN0808" contains. Access and flash ok the 3 files. But: 1. When you mount, came the message "failed: Device or resource busy" 2. The flash-files "app ....." and "rfs......" ended in writing 99%. 3. After reboot, the system stopped after the start picture. 4. Then I have updated with the file from the Dongjia-HP. The mini nvr takes after flashing a new update, but I've probably incorrect versions. If the message "device - busy" or "writing 99%", a clue to the source of trouble? Are the recovery files for Xvision or DA-2008 GM? best regards Dirosa

Telnet not want to work .. I have first the problem with the - "Port 23 - no connection" - to eliminate.

Hi GhostRider, many thanks for your quick response. It gives me hope, that I can save my mini NVR. But has yet to make myself acquainted with telnet. Have I understood correctly, the Statement: 1. USB-Stick empty / formatted and copy file "0153 - recover files ..." with 4 subfiles and then rename it from "0153 - re .." in "short i.e." ? 1.1. Or must I have the USB-Sick before to prepared with "Microsoft USB Flash Drive Manager"? 2. Do I have the factory-IP-name "192.168.1.188", or the last set of my IP address "192.168.1.103" enter? 3. Are the type "£" in the text - for example in: "run CMD£¬to DOS£¬" a command sign or is that to leave out? Or the symbol for the Enter key? Many thanks to you and the forum community for the support many greetings dirosa

Please I Need your Help ! Hi friends of china hardware, I want to connect the mini NVR Dongjia DA-2008 GM-B with two IP-Cams NVSIP / Janrs JA-1080 FB-WIFI from Aliexpress. The cameras are not found automatically, but also many attempts with the manual settings did not help. Here have read a lot about it, but found no success so far-making reference. From "despair" I've 20140416 played the update of Xvision using a USB stick. Then unfortunately only start screen and then out. Other Updat files are dismissed as falch. Is anyone from the circle of mini NVR experienced so nice and can give me a hint for revival of the NVR. Have the seller at Aliexpress Dongjia asked for help - unfortunately this remains silent. regards disosa