narinesa

I have Dahua and Hikvision NVR. Both are on the same network and configured the same and working with gmail. Last week, Hikvision stopped sending email and cannot figure out why. If it relates, the same time paperport scanner software will not start indicating that there is no default email client. But I do have outlook as the default. Paperport is x86 and outlook is x64.

I am using Hikvision nvr and smart ptz. Motion detection is set for 0000 - 2400 It is being triggered day and night but I am getting only dat time pictures. No motion detection pictures night time. I am not emailing it and the buzzer is turned off. Just want to capture day and night pictures. Recording is set for 24 hours.

Where can I download Hikvision web plugin for windows10 using firefox ? I see the macos version but not the windows

Hikvision digital ptz takes 3 pictures for each motion detected. 1. Can I change this count to 1 or 2 2. Can I change the timing between each picture Current timing between pictures maybe 3 seconds. Would 1 second or shorter I am using it in the LPR mode with motion detect. Not sure the proper use or setup for LPR but playing with it.

Perfect - thanks.

Where can I get a copy for ie or edge ?

In the motion detect mode, I am getting 3 pictures shots How can I set the NVR for one picture shot ?

just got the NVR. Not sure how to check if firmware needs updating However, it is working only on a Hikvision camera. How can I get it to work on Dahua PTZ ? Other brands PTZ ?

Just setting up this Hikvision NVR 7616 with several cameras. One is a Dahua PTZ I can get the networking email test ok but not the motion detection I am pretty sure that I did set it up properly according to the manual Perhaps some other switch is missing or perhaps that I also have a Dahua NVR on the same network But Dahua NVR motion detection is working fine

Hikvision camera uses 24 volts AC power supply at 24 watts max per manufacturer (not dc) or poe I have a 24 volts AC power supply with 60 watts (3 amps) Can I use the 60 watts power supply ? Hopefully the camera will draw only what it needs or will use the full 60 watts and burn up ?

Thanks. I will use the 60 watts power adapter against Hikvision tech support instructions

Looking for Dahua model SD-65230-HNI PTZ speed dome camera head belt and ball motor belt. Ants gotten into my camera and eaten the rubber belts

I am looking for Hikvision power supply or poe for remote use 1. 24 Volts AC output at 24 Watts 2. 24 Volts AC output at 60 watts

Hikvision PTZ DS-2DF6336v Configured the camera from factory IP to my network IP Reboot frozen Cannot find camera under factory ip or my new ip Need to do a factory hard reset Cannot find the reset button

Mystery solved. Dahua webplugin can run on internet explorer without problems Thanks for all support and Securame

Dahua webplugin will not install on firefox or edge I do have system mechanic and avast virus programs Webplugin is on the dahua nvr

I have a IP PTZ camera new as 192.168.0.99 I want a software to find this PTZ on the network and configure to my local network settings

I am looking for one of the best outdoor PTZ for daytime use at 500 feet. Prefer camera with a tinted globe so that no one can see the head moving (at close distance) Can I see the person face ? Can I read a license plate ? Can I get the best quality picture with 500 feet distance ? I was thinking about h265 network IP ptz for NVR operation and open to all suggestions.

ok understand. Any PTZ with 940 IR available ? Is the laser light more visible ? I don't know if hikvision is better than Dahua but I do notice more compatible protocols like ONVIF, PISA, etc with hikvision

In the night, the 840/850 IR is visible as a red light to the eye. Someone can see the light tracking them. I don't think that the 940 is visible

Both are very impressive - Dahua and Geovision. I prefer without IR. Must be in a globe/dome - tinted if possible. Reason is that people close up will not notice the camera tracking them in the day. They can see the (840-850) IR light in the night unless I can get 940 nm I did some research which indicated that a Hikvision smart detection might be the answer but very expensive

Need repair assistance with a PTZ camera where the ball is moving only to the left (Looks like right side movement is not working) Dahua PTZ SD-65230-HNI

I would like to waterproof existence cat5 connection (male-female). This is not a new connection but just want to cover the connection to make it waterproof for both the male and female. I don't know if a pass thru type will work because the cable is already connected but on open type should work. Any suggestions and pictures would be helpful

I have this high tech camera with NVS-DM36-HD (TI DaVinci chip) h264/h265 I cannot get it to work with Dahua NVR4232 under onvif CMS software appears to be working fine but I want it to work with my NVR Just the PTZ functions works with the NVR. I want the NVR to configure it and use motion detect. I think that it needs a special protocol other than onvif ? Or do I need a different brand of NVR ?

Lots of good info. Will take some time to digest. My IP cameras can also map directly to a drive. Looks like 2 NVR may be the best option Don't have POE since PTZ uses 50 watts with IR and are 150 to 300 feet away with local power