dscc1

hi, can you link to a few that you've used. it sounds like it may be good for my attic as I need to use one on each side where I have a gable that I could possible cut a hole/etc in. these cameras can survive the heat/cold? thanks.

what are you using the system for? just lower quality recording and monitoring? by what i see on their website ... it comes with this camera (qsc1352w). which reads to me that it comes with a power adapter. does not seem like it's poe possible since it's a BNC connector. if you're able to run ethernet wires, you're probably better off getting a POE based system. Power Supply 12V DC 500mA Power Consumption <3W (When LEDs on) per camera http://securityhardwarestore.wordpress.com/tag/qsc1352w/ http://www.q-see.com/16-channel-dvr-with-16-refurbished-520tvl-cameras-qc3016-1635-5r/

Has anyone used this model? Is it similar to the mini nvr linked? I'm trying to find a model to replace my zmodo nvr controller as alerts/email on it do not function at all so far for motion detection and sending an alert. Model NVR1004P http://www.seculink.biz/productshow/nvr/one/2014/0519/267.html http://www.aliexpress.com/store/product/4-Channel-960H-CCTV-Network-Video-Recorder-IP-NVR-4CH-Support-ONVIF-2-0-System-H/410015_1651987822.html

Since it does seem like browser issue now (?). What about clearing/deleting all your IE cached settings? Or login to your PC with a new profile and try IE from a clean profile. Yes, but unfortunately no change in behaviour. When now trying to reinstall the plugin, I see that the installation procedure hangs at the step "Registering files...". I assume that's the real problem. Rightclick and run as Administrator doesn't solve it.

Maybe it's a browser issue with loading the ocx / plugin? Have you tried to put IE into compatibility view settings for the IP of the nvr?

Agreed. Their cameras are ok for monitoring quality. But, the NVR needs a lot of work and the interface is very lacking. If their alerts and uploading worked then I would be all set for using it as remote monitoring station.

Hi, your varifocal camera, have you actually been using it outside in the heat/cold? I see it says operating temperature as " -20 °C ~ 50 °C (-4 °F ~ 122 °F)". I'm looking to use it in the east coast weather outside.

I currently have a Zmodo POE NVR (model ZP-NE14-S) that can't seem to properly do alerting properly. Does anyone know if this will work properly with the Zmodo POE cameras (model ZP-IBH15-S)? The zmodo works fine for the motion capture and keeps the files small. But, I have not been able to get alerts working. And, their different programs for interfacing with the nvr and cameras is horrendous. - emails alerts; prefer being able to upload or attach videos - motion capture auto save Also, as a update to this post, has everyone been getting the same 2-3 mini NVR models? Maybe a wiki or summary page can be created with the links to what everyone has purchased and from where. Thanks.