papagray

hi have a few cctv cams all have reset buttons except this one, somehow password to access it has been messed up! and no reset inside!! cannot get no response typical chinease supplier! can anyone advise we have run all our normal passwords submitting caps as well but to no avail has anyone come across these and have a fix unsure but willing to disconnect and short if nees be cheers

having the same problems trying to input my xvision nvr to my labgear hdu681 have sky being passed on uhf channel 37 purchased a labgear rf111 modulator, then associated cables nvr has hdmi and vga outputs checked vga output to monitor picture clear when I attach vga convertor then vga to scart to attach to rf modulator nothing checked rf modulator to tv signal not bril but still a signal. when I attach all together and plug into the tv rubbish picture 5 to 6 pictures over layered green bluey screen totally miniaturized have pulled out what remains of my hair I struggle due to my disability poor memory I have post polio and ME. all I wanted to do was plug nvr box to see on other TV's in house, not control them I know I can't so cheap simple system if someone can design one they will make a mint possibly one box does all!

yep I ensured the sky channel was different. I am able to view sky on all tvs I did have a blank screen (but no picture) at the time I was travelling from downstairs upstairs tuning in the channels and did at one stage view a black screen hence the fear it was the scart cable I purchased which maybe wired incorrectly for viewing scart to vga not vga to scart as I ordered. so now waiting again for the cable I have reordered. lots of fun!

hi have tried in vain to sort this out searched the internet, spoke to loft manufacturer and NVR reseller but to no avail. have a labgear Loftbox with network CCTV input, next to it I have hidden is my xvision x400r NVR. I was advised to connect the nvr to a rf modulator then plug directly to to the loftbox sorry a Labgear hdu681, and then tune TV's used a vga output to scart to connect to RF modulator again Labgear md111, thought to keep consist with manufacturer. nothing blank screen so this time was advised to use a video convertor video to vga then vga to rf modulator to labgear. arrived today so tried again.. nothing. have given up with labgear never respond to e-mails and y3 keep sending me to sales so anyone will it work ? have got it as I am disabled and it would be easier for me to see who is at door or lurking around the outside, as I have cams fitted to the back of the house and internally all are networked and when I plug tv into the x400r I get the cams straight away. cannot find anything in the manual accordingly the vga should work as a normal output so you intelligent people just what am I doing wrong did check cables swopped them over tried running tv signal through rf mod to aerial input just a poor picture as I expected but nothing detected on tv

hi thanks tried the direct route, and the picture for sky become totally unseeable! think my problem is within the scart socket I purchased a vga to scart and did a test but no picture from nvr to tv even tried vga to tto tv from nvr good picture so that cable was fine! until I get the vga to rcs and rca/scart plug (switchable) can I retest the system. mod is labgear 111 and have no way of checking it is working until I can conclude a viable signal which is impossible to test that the equipment works as gear is secured next to loftbox , for security I am saddened that I was unable just to plug cctv nvr directly to loftbox, poor information from Labgear and Y3K

have got it networked already did run tuneup on tv but its the fact that nothing is being detected no picture at all, nor any sign of a signal from the nvr recorder from the vga port but a signal from the hdmi to monitor in its location is perfect its the connections from vga to vga box then vga box to the rf modulator then the labgear there is no picture to the rest of the house. that is what I wanted so I cannot understand what I have done wrong!