Hello,
I am about to start pulling wire through a commercial construction project and have the good fortune to make my runs before the sheetrock is installed. The ceilings in this building will not be suspended tiles, they will be solid sheetrock.
I would like to be able to terminate my runs by pulling them through some type of box or low voltage box nailed to the ceiling joists exactly where I want them to come through the sheetrock so that the rock installers will cutout for these boxes and my cables will be hanging from the ceilings ready for me to install the cameras. I cannot use the standard single gang low volt J boxes as they are bigger than the footprint of my cameras.
I haven't found anything that fill this need.
Thanks for any help or suggestions.
jVB.
