Hi all,
This is my first post ---- I've done some searching and I've called up some vendors (one in TX and one in FL) that commonly advertise DVR / cameras and I've run into roadblock --- so I am here to ask for help, if anyone is willing to share! I understand as a newbie to this forum that I can stand to learn a lot and I'm probably asking some stupid questions --- so bear with me....
I'll get to the point. I have a 4 channel analog system that records at D1. I have cat-6 pulls to each camera. I cannot pull more cable. Currently the cameras as all analog cameras using baluns to pull power and video over Cat 6.
I'd like to upgrade to a new system with much better resolution -- Full IP or HD-TVI or whatever. The constraints are though that -
**** The System has to accommodate 4 separate composite outs (for 4 cameras channels) for my old LCD monitors that are built into the wall. I cannot rip these out.
**** I do need 4 channels of composite out for the 4 cameras ---- I cannot have a multiplexed signal because the old LCD monitor system does the multiplexing.
**** I don't care too much if I am running IP over CAT6 over baluns over CAT6, but I cannot pull anymore cable.
My main problem is that I don't know how to design the DVR/NVR. I'm computer saavy but have 0 experience with building NVRs. I don't the the right combo of equipment to do what I want to do. Since the current analog DVR uses all BNC/coaxials for video, I use external splitter boxes to split to my hearts content from each camera to feed (1) the DVR and (2) the old LCD monitor system on the wall.
I've attached a diagram if that helps. Thanks so much.