Neutech
Installers-
Content Count
331 -
Joined
-
Last visited
Everything posted by Neutech
-
urgh... 'trouble in TAPE transport area'?
Neutech replied to ljarrald's topic in General Analog CCTV Discussion
dont even waste your time on it! Get the old stuff replaced with a DVR -
screwon bnc are a disaster but if you havnt got compression or crimpers then better than nothing, an alternative is the premade leads as you have stated, they will give you the bnc either end and the 12v power plug one end and socket the other, if you need phono at an end but a bnc female to phono male adaptor sounds like fun project
-
To be honest you arent going to get colour unless you get light in there of some sort, the IR will help the B&W picture, if you buy all in one cameras with IR on it, screw the face off and remove the IR ring and rewire it to shine down and site camera in a corner maybe, means you wont end up with overloaded IR light on the birds
-
CCD camera as for 12 IR leds, really depends on camera,leds etc, personally i would fit a small IR ring seperate to the camera,up in top of next box shinen down RG59 is fine but with nestboxes being external i would use External Grade CAT5 and baluns BNC to phono or scart to connect the multiplexer to the TV Where you located?
-
Where in the World are you Based? Takes 1 minute to put location in profiles and helps
-
Antenna should run to sky box then RF2 back up to Dist amp not a splitter MOD needs to be inline from Antenna to Skybox
-
Where are you located Jim?
-
Windows media player will play the standard AVI files from a Geovision Never had an issue with this on any Windows based PC/Laptop when you went into video/audio log to playback footage, you selected AVI icon and mergered the file etc, you use windows own CD writer function or Nero or another SW to burn the disc? VLC player will play geo codec
-
just covered the lcd in coffee...thanks Sean click the writing
-
Dont know where/who told you that Bud but its way out, 3 phase no problem i've been plenty farm installs with 3 phase present in North Also your going to need to get all the electrical work signed off involving the relays and modifications you have made to lighting circuits etc, you cant carry out Commercial works without this
-
...when did they rebrand Tom?
-
These were sold in UK under Brand of Serage by Gtec Security Were MPEG4 at start but now H264
-
Its not D1 read the spec....says D1 recording 120 FPS NTSC (im guessing your in USA) so 15FPS Live view 30 FPS yes but not record mode
-
Have a chat with the guys at - www.cctvdirect.co.uk Personally i dont install IR based cameras due to the spiders loving them to web all over. Look at a seperate IR illuminator if thats the way you want to go or a lighting solution to get your camera back into colour mode, Is the external lighting outside your Shop?
-
Cat5 cable, Baluns and how to use them for newbies
Neutech replied to Numb-nuts's topic in General Digital Discussion
Talk nice to mr tumble Henry and he might give you a porsche -
New CCTV system for "particular" friend
Neutech replied to pilotg2's topic in General Digital Discussion
Do you have the case and rest of bits required? Shout if you need anything or SW for it i have loads i used to repair these JPEG2000 still puts lot new dvrs to shame on playback pity about the file sizes -
Hey Gaz Confirm again , does it say 12 port S1 on the geo card? If so its only a 12 Channel DVR you can have then, is there 2 serial cables? If not and it says 16 port S1 then you need to log i as the admin or supervisor to allow you to change the settings under password, this will allow you to select the 4 missing Hope this helps
-
Exactly as said above Modulator and connect it into the Loft Box, wont effect the recording of your DVR Buy a good quality version as well
-
My DVR has stopped recording
Neutech replied to lizmclaughlin27's topic in General Digital Discussion
Whats make and model of DVR ? Stops recording, can you still view footage on playback from previous recording? -
What type of MOD are you using? the cheap units have no digital loop through on them Did you switch the source on the TV to analogue and check also what channel are you using on the MOD? you need to watch this also as it might be close to the TV channels in area, go into TV menu and look at tuning and lsit the channels it will give you a preset freq number beside them e.g. BBC1 CH32 etc ,each area transmitter is set up diff frequencies but you can google it and find for the area you are in HDMI Dist as already mentioned is a method or cheaper way is to drop a RG59 to each TV and use the scart/AV/Phono input on each TV, feed them all back and use a CCTV Splitter amp, one feed from DVR. Normally better quality than MOD method but not always easy to get a cable to every TV required in the House Where you located?
-
You need to fit another IR flood on that to get any light oruse a halogen flood with a PIR on it so when someone comes past the Tanks it comes on giving you more light IR all in one cameras never have the distance claimed by makers
-
but is your cctv signal not analog ?? using a RF-modulator you would plug your camera into it then give it a range or channel number. then it feeds your RF connection on your tv (arial socket) going though your sky box will not allow you to do that. all TVs (at least in the uk) are all digital The output from the RF on the skybox is analogue not the SCART so if you have sky eye system in the house or you can watch sky on any TV on a channel in the house you have an analogue Dist splitter then it will work 100% as you have already done DS No freeview set top boxes wont work but a newer style TV from last few years will work as most are dual tuner a few senarios - House A has a no sky or cable TV just antenna on roof You check each TV and they all have freeview set top boxes forget it unless you want to buy a Digital modulator @ £500+ House B has Sky TV dish no antenna You check each TV and they have sky boxes no use again House C has a Sky Dish and an antenna you check each TV and they have an RF cable connected now you can check for the TV splitter / Dist amp / Loftbox Modulator will work in this case, if the TV has no set top box but is picking up Freeview Digital select source on TV and switch to analogue and tune a channel into the Modulator This is all UK based and by 2012 most of the UK will be Digital If you get stuck speak to local TV Antenna/ equipment supplier and they will keep you right esp if you buy from them I use a CAI Installer on bigger domestic installs where they might have a mish mash of TV / Satelite etc
-
Majority have Dual tunners so both analog and Digital, sticking a MOD inline and setting up on Analogue works no hassles and dosent effect the digital
-
Yes Scrap the splitter / booster thats there already and fit the loftbox in its place, rem they are F type plugs on loft box same as satelite connections not TV plugs thats probably already on there They are a better and tider way of TV Dist and getting your CCTV inline
-
Have never seen the DVR system like that before and i've seen plenty Why does the SW need updated? Did you pay 4k for just DVR? or was there a full install heard a few interesting things