Joeinamillion

I am testing a HikVision DS-2CD2532F-IS with a 128GB Micro SDXC card. According to HikVision the camera will work with cards only up to 64GB, but since I have both the camera and the card i thought I'd try it out. I would like comments, questions, and suggestions. Here is some information on how I am testing: Camera: HikVision DS-2CD2532F-IShttp://overseas.hikvision.com/us/Products_accessries_10505_i7571.html Model: Chinese, with English Mod. Firmware: V5.2.5 build 141201 Encoding: V5.0 build 140714 25fps @ 1080p Card: Silicon Power SP128GBSTXBU1V20SP So far the camera saw the card without issue, initialized (formatted) the card without issue to 128gigs, and recorded 100gigs of data to the card without issues, and I have tested a play back fine. At this point is it safe to say the card works fully? Is there any reason not to use this card (other than the manufacture only says the cameras work only up to 64gigs in the data sheet)? The only reasons I can think of would be if the camera has issues indexing the files on the card (I've been told that is the reason some other type of devices only recommend up to certain sizes.) So maybe a large card could cause the camera to become 'laggy' or sluggish (the reason suggested by device testers) with recording, or even encoding (eg. Live View, network recording)? I bought the card to use with a DS-2CD2135F-IS, which can use a 128GB card according to HikVision's Data Sheet. That is a newer version of the DS-2CD2132F-IS and there seems to be little difference between the two, so maybe HikVision is working a on DS-2CD2535F-IS, with the same differences?

Does any one know officially if the newer larger hard drives from WD Purple or Seagate SkyHawks are SMR? What are the views of using a SMR drive for CCTV? This article seems to suggest that the new 10TB Purples are still (at the time of the articles writing) PMR. But I'd really like something more official.

There are a lot of great inexpensive cameras out there, but remember a great camera attached to and older DVR, and/or screen may not give a great recording. If your DVR maximum recording is 320p, 480p, etc... a 1200TVL won't look any better in playback. I just don't want you to be disappointed. The good news is that many high rez analog 4 ch DVR are pretty inexpensive too.

I would like to get a few of these (HikVision DS-2CS54A1P(N)-IRS). They are 720p analog mini domes. I love this models tiny size, and it matches my DS-2CD2532F-IS. I used to see them on Aliexpress, but not now. I have only found them sold on non-english sites, and one "english" site, but not sure if I want to buy from and unknown site http://www.dhgate.com/wholesale/search.do?searchkey=DS-2CS54A1P-IRS. I don't even know if its an active listing there.

I have Hikvision IP cameras. One of these cameras has an analog output for testing when installing (DS-2CD2732F-IS) [D-Link rebrands this model with a BNC out, Ethernet out, alarm out, and power in, just FYI]. I am hoping to be able to find a similar connection spot on my other models (DS-2CD2135F-IS and DS-2CD2532F-IS). Clearly on the other models there is nothing from the manufacturer for a connection, but surely there must be some place where the camera connects to the encoder? I guess I need the Hikvision plug schematics. I'm am doing this only as a enthusiast hobbyist. I guess there is no market for an analog live view (zero lag) camera with all the bonuses of IP mainly because of the extra wiring.

I am not familiar with your brand of DVR, but many DVRs simply use a web browser based interface. So you should be able to access and set up the DVR by using your web browser (ie. Firefox), type in the DVRs IP address (eg. 192.168.0.64), and login into the DVR. The rest gets specific to each make and model of DVR. Also many DVRs create uncommon file formats, and need a file converter or a special player to view the recordings. If you need to get the files off your DVR; many have USB back up options. Not ideal I know. I suggest trying to find the manual for your DVR. My Google search came up with the Xvim brand for sale, but you didn't include a model number so I couldn't look any further. Best of luck.

The subject says it all. I am looking for an English Manual for a HikVision DS-2CD2135F-IS. TIA, joe

I want to buy two HikVision DS-2CD2135F-IS cameras but I am unsure if they can record in H.264, as well as H.265. I also would like a link to the manual, specs sheet etc. please (found nothing on Hikvision.com)

I hope some one can point me to a reputable aliexpress seller for these cameras listed below. (The sellers I used in the past are either gone from aliexpress or no longer carry these cameras.) Free shipping to Canada is good too, I'm in no rush. HikVision DS-2cd2132F-IS with 2.8mm lens HikVision DS-2CD2532F-IS with 2.8mm lens and 4mm lens sold in single units. Also looking for an 8 channel NVR to go with these. I would like to use one with two 4TB+ 3.5" HDDs.

I would like know if it's possible to buy, or make house numbers out of IR lights. Some IR LED glow bright red and I think would make for a great dual purpose covert IR lamp. Any thoughts?

Thanks, but apparently no one is using it. All the text is gray on the same color gray background, so the text is invisible. Charming. I have the white-windows to fill stuff in, but I don't know what they are. It's not possible to highlight the text, and it's immune to themes. Very covert... The Linux WebComponents linked above simply isn't seen by any browser. The libs land in /usr/local/lib/WebComponents, but probably because it's 32bit and my browsers are 64bit, they don't see it. I would think iVMS-4200 for both Windows and Linux would have the same layout. You might have success using screen caps of the Windows version to know what text should correspond with each field. It's not the greatest work around, but I don't think filling in the fields is going to be a common task. Even if it is, you'll soon remember. Either way, if that works, just keep the screen caps handy. For WebComponents... maybe installing the 32bit browser version? I've never tried installed to install both 32bit and 64bit of anything on the same computer, it could cause problems. I started playing with Linux Mint at the start of May 2015, but by the time I get back to it, and even attempt really using it for anything (like iVMS-4200, or WebComponents) it could be next May. If you have any success please keep every one posted (there are shy non-posters here that you might just help.)

I can only guess at this as I have zero experience with equipment in cars, but this sounds like interference. Here are some simple tests before you do anything else: Get the camera and monitor turned on and 'working', fuzzy lines and all. 1) Watch the monitor and adjust the radio (change stations, FM/AM/Cassette/CD, volume, etc. On/Off too. ), If the lines change, it is likely interference from the radio. 2) If possible try to use the monitor to view something else (such as a dvd player), but keep the monitor installed just as it is in the car. If the lines go away now it's likely your cable run getting interference someplace, so try a new cable run in a different location. If the lines remain (while the monitor is hooked up to something else) it could be the placement of the monitor, or where it is plugged in (cigarette lighter port?) 3) Almost anything using electricity can cause interference (lights, wipers, fuel pump, anything). So watch the monitor, and try lights, wipers, etc. This is very unlikely to have anything to do with the issue you are currently experiencing, but I thought I would mention it. The most likely cause is the car radio/stereo/amp*. If you can find some other place to run your wires (away from all other wires is ideal, but maybe not possible) it may solve the fuzzy line issue. Try to keep your wire run away from anything A/V (Including the radio antenna). Do temporary runs and test before a permanent install to see if this is your problem. Heavier insulated cables maybe help, and maybe a filter (not sure about the filter, I'm 100% guessing.) *This is even more likely if you have some after market sound system install in the trunk. Hope this solves the issues.

If you do use citronella oil I'd suggest trying to keep it away from, and off of the IRs and camera lens, obviously. Also try to avoid things like any stickers, or 'rubbery' (aka soft) gaskets, as the oil may cause stickers to peel (the under side of the Sunshade on the 2032F looks like a black sticker (Could you let me know?)?, and it could cause gaskets to deteriorate. Oh OK, so it's more like a factory reset on a router. All the settings go back to defaults. Not something to do by accident then. Yeah, best to ask and know what it'll do before you push it. You could end up with a all Chinese camera, AND if you read The Network Camera Critics (who has sadly passed away ) warning about new HikVision firmware, it could become an even bigger problem. Not buying is a sure way top keep your money . And also remember, in a short time the price will drop, and in a short time after that the newer model will be out, and just after that will be.... anything electronic is basically like that. In the early 2000's a 720p 60Hz LCD 40" TV was $10k, today it's landfill.

Good points. The spiders are relentless, I was thinking of some sort of insect spray repellant. citronella oil is said to work, of course you'd probably have to make it part of your routine 'maintenance'. I pretty sure the reset button does a lot more than that. I think it resets all changes, possibly even IP and port. Unplugging it would just re-boot it. My plan is to focus at the driveway. There's only one entry/exit. I need to do my sums and work where I can mount the cam, then figure the lens size required. Closer would be good because I could use the 2032 with 12mm option. The 2032 would be a much less costly idea. Maybe using a 5mp camera would be an option (I know nothing about those, not cost... nothing ).

I like the domes mainly to (hopefully) deter spiders from turning the cameras into luxury movie star condos. The 2032 bullets are awesome for a lot of reasons too such as: easy access to the card and reset button. The tiny size of the camera. It's easier to install. It has a sunshade. The lens is likely to stay cleaner, longer. And the IRs are less likely to reflect inside. 16mm? I guess that would be a box camera? Even the 12mm dome and bullets are hard to find. But even a 16mm might not get what you want. A parking lot is generally a big area, and to get a 16mm FOV on a plate number would be a 'shot in the dark' I would think. Good luck though.

Vendor: Dragoneye. Initially I thought about a bigger lens but agreed to the default 4mm as seller said that was 'in stock'. Next cam I'll specifically ask about availability before buying. I don't think they keep any in stock as such so maybe it easier or cheaper to convince a customer to go with default. For me I want 6+ cameras anyway so it will work somewhere... I like the look of this cam here and the seller has awesome feedback so on my favorite vendor list too. However there are only two lens currently selectable. Mostly I want 4mm I think, but I will want at least one 2.8mm. Seeing as I have what I think is mostly about 4mm ones now (analogue) that are I guess 0.3mp a 2.8mm lens would maybe let me save some $$ buy starting with less cameras . Not sure until I get some time to play with the vari-focial that I have. I have looked at the camera, and the vendors you mentioned. The reason I asked about the vendor was because I noticed that on the DS-2CD2132F-I one vendor has free shipping, and the other doesn't. This makes the free shipping (DragonEye) vendor cheaper (for me). To what country did you get your unit shipped? For me to get that camera shipped to Canada from the vendor "CCTV Camera China" would cost more than 10% of the cost of the camera. You need to make sure when you order that you will get the newer 'F' model. There is a BIG difference. The non 'F' model has no SD card, but that's not the other difference. The 'F' can be wall mounted (three axis mount), the non 'f' id ceiling mount only (two axis mount). The "f" has better night vision, the non 'F' model apparently has some IRs blocked by the cameras dome. You can find BOTH models reviewed by "the Network Camera Critic" here DS-2CD2132F-I and the older DS-2CD2132-I

What would you say is the closest point for a 2.8mm lens?

Which AE vendor did you use? I don't think I'll be getting that model as the DS-2CD2132F-I is now out, but I do want a good AE vendor. Oh, and what lens did you get?

I install two analogue cameras that do this too (I don't use motion detection though). I suspect this is dust, or pollen. I can't see it when I look, but the cameras IRs seem to reflect it and the cameras see it. I have no solution, only a guess that some type of IR cut filter might help? If it is pollen, you are about to discover it's out there form about March to December. Out door allergies the other months are covered by indoor allergies . And some months overlap

I don't think this would be a 'flagship' camera at any time. I think HikVision only is messing with this model because it's a lost cost, entery level model that became popular. Rather than painting the unit have you considered trying to make a 'slip cover'. I don't know what would fit best, as I don't have one of these yet, but I'd start by looking at PVC tubing [ie. central vac tubing, drain piping, electrical conduit]. You'd still need to spray paint it, but you wouldn't need to worry about painting the cameras glass by accident. After finding tubing that fits nicely over the camera's housing I would cut it to a half inch (2cm) longer than the cameras full length (including the sun shade). Then I'd couture the front to match the sunshade. I'd then drill a hole at the bottom back of the tubing for a screw. Paint. Slide over camera. Put in screw to stop the slip cover from sliding down. I'd then use one or more small pieces of left over tubing and wedge them gently under the slipcover at the front by the sunshade to stop the cover from rotating. You just need to find a tube with an inner diameter a good size to fit over the cameras housing.

It looks like some one at AVG brought their child's science fair project to work. http://now.avg.com/avg-reveals-invisibility-glasses-at-pepcom-barcelona/?utm_source=newsletter&utm_medium=email&utm_name=march2015art1&REID=582720.77301.1165244&ECID=em-na-bl-Newsletter-fMob0315-_Split3&SMID=2002 Not only do these things make you stand out anywhere you might wear them, but also stand out in any image the device 'successfully' works. In addition to all that, AVG admits many of the devices these glasses are designed to defeat already render this concept device ineffective. The good news? There is a market for these! Justin Bebier could be one celebrity who would love a pair of these, they'd be perfect with his chrome painted anti-paparazzi car. Aside from the weird and rich, the generally paranoid would buy them. Maybe AVG should know about this device too:

I'd suggest something like this http://www.homedepot.com/p/Bell-1-Gang-5-Hole-Non-Metallic-Round-Electrical-Box-PRB57550WH/202284522 and this to cover http://www.homedepot.com/p/Bell-1-Gang-Round-Blank-Plastic-Cover-White-PBC300WH/204155109?MERCH=REC-_-NavPLPHorizontal1_rr-_-NA-_-204155109-_-N. They come in other colours too. Could I attached the camera onto the blank cover? This cover is much better than the first one I linked to above. http://www.homedepot.com/p/Carlon-4-in-Round-Blank-Electrical-Cover-10-per-Case-E365CW-10R/202077436?MERCH=REC-_-PIPHorizontal1_rr-_-100404094-_-202077436-_-N

Yes, that's the idea. Just carefully drill the needed holes. Search around on the net or in store, there might be a stronger one (It's hard to tell how thick/strong that one is form the photo). It should be ok, cameras don't have much weight, unless a fat bird decides to nest on top of it. Almost any box cover can be used. If the camera doesn't have a moisture cap of the cable (or if you can't use it) electrical tape is perfect. Here's another box, with a cover too. And it's very strong. http://www.homedepot.com/p/Carlon-15-15-cu-in-Type-X-Round-Conduit-Body-E970CDE-CTN/100404094?N=5yc1vZbohnZ1z0usncZ1z116nv

I'd suggest something like this http://www.homedepot.com/p/Bell-1-Gang-5-Hole-Non-Metallic-Round-Electrical-Box-PRB57550WH/202284522 and this to cover http://www.homedepot.com/p/Bell-1-Gang-Round-Blank-Plastic-Cover-White-PBC300WH/204155109?MERCH=REC-_-NavPLPHorizontal1_rr-_-NA-_-204155109-_-N. They come in other colours too.

I guess that is why one Amazon vendor I was thinking of buying from seemed to disappear from Amazon.ca That vendor is back now, but I was freaked out the way he was just 'gone' until I read this post by Securame. I think v5.2.5 is only Chinese, v5.2.8 in think is multilingual (I've been readin too many things, in too many places, to know what is what off hand.). I'd like to know what all comes in the box other than the camera. ie. a disc, paper copy of users manual, installation manual, and data sheet (and in what language).