Hi all,
Got a problem to get the Motion Detect function to work on my Mini NVR (as most of you seem to do) .
This question is probably directed at Mike Mahon (he's seems to be the expert with these devices " title="Applause" /> ), but anyone else is welcome to advise.
I've bought a Mini NVR N6200-4E. I've upgraded the Firmware to V4.0_20150124_Firmware to try and solve the issue, however no luck. It records fine in Manual mode, but I'd like to get the Motion Detect to work, as it makes it easier to track security breaches.
My cameras are all Wansview NCM624W. They are H.264 and supports both ONVIF and RTSP protocol. Motion Detect is activated in the cameras and they do send emails with 2 photos to my gmail account when triggered. I've also tested them with iSpy software on a laptop and again the Motion Detection works without issues.
The only conclusion that I can come to, is that the NVR is the culprit.
When contacting Wansview before I bought the NVR, they confirmed that these cameras support ONVIF 2.0.1, but has not tested it with these specific NVR's. They suggested to buy a HIKVISION or Dahua NVR. This suggest they don't use a proprietrary protocol.
Do you have any suggestion of getting these cameras to work with this NVR? (I'm pretty sure all the settings in the NVR is correct, but happy to check again if suggested)
I appreciate your time to reply.
Thanks
Aussie_Perth
