jovanardi

And both are working. If I want working onvif back I have to update complete firmware.

EH version of NVR2 has diferent hardware so I think just EH version has problem with update. I have no picture with i12 protocol and Escam clone camera, so I have to use onvif, but motion detection is out of control from NVR. I can set it from cameras web interface, but NVR sets cameras to default sensitivity level and default motion detection area. It is usable but far from perfect.

Hi. What exactly type of NVR2 do you have kurben? And which i12 update file did you use? I have NVR2-9EH version and i12 update file replaced Onvif protocol with i12 protocol. Do you have both protocols?

Well...I updated my SMAR cameras with escam firmware - no problem. But last thing I would like to solve is: How to force my NVR not to change my motion detection settings (area and sensitivity) to default after camera restart. I already tried login NVR with no-admin account created in camera, but it still control camera. No idea here?

I got 2 720p no name and 1 dahua 1080p and they are working together in 1080p mode of nvr

Try to change working mode of your NVR from the first page of settings. Something like 8x 1280x720.....and restart

Try this: 1. Turn off NVR and disconnect from net 2. Insert usb flashdrive 3. turn on NVR 4. update Every new update repeat from step 1

Hi. I have the same NVR but 9channel EH version. You have to update this NVR with updated (June or July i am not sure) i12 update file. But this update file replace onvif protocol in NVR. After update my NVR found my cameras as i12 (http://www.aliexpress.com/item/720P-IP-CameraSAE50-NX4C100B/1865455467.html) but i had no picture. I found this webpage (http://www.urcctvstore.com/Download.html) which saved my NVR and downloaded my original firmware. So I have picture back but I cant set motion detection from NVR and after camera restart settings of motion detection area and sensitivity come back to default values. Same thing happens with dahuas i have. I am thinking about flashing Escam firmware (Escam qd500) to my cameras. But it is risky and have no choice to flash original firmware back because i dont have update file. Which camera is best compatible with this Mini NVR II? or Is Escam motion detection working on this NVR? Escam has new firmware from January 2015 on their site. http://uloz.to/xMVn7bXT/mini-nvr-ii-protocols-zip - i12, i13, i18 and older than actual onvif protocol (just picture working with my cameras). That is all I found working with Mini NVR II EH version Try and share your experiences.

Hi everybody from Slovakia. I have Mini NVR 2 9 channel n6200-9eh. I have SMAR cameras, software looks like ESCAM/Xmeye cameras, onvif manager says 2.04 onvif version. Motion detection working with onvif protocol but every restart of camera set motion detection area and sensitivity to default values. When NVR is disconnected it keeps setings after restart. When I try to set motion detection from NVR menu, it always return to original values when I exit motion detection menu. So I have to set it right from cameras web interface. I tried to update i12 protocol (from rusian website), it replaced onvif in NVR, cameras were searched by NVR but no picture. So I went back to original software and trying everything...I would like to control cameras from NVR or not to lost settings after restart with NVR connected. Any idea?