sam10693

Hi mate right im using a dedicated micros sprite 2 set to bbv coaxial telemetry then i use a bbv rx100 set for forward vision so remember if you get metal mickeys have the protocols set to standard forward vision then all you shuld need to do is connect your 2 data recieve wires of the mickey to yor rx100 interface and connect the video to the camera bnc on the rx100 then coax from the telemettry bnc on the rx100 streight to a dvr or controller that transmitts bbv coax. sorry my camera dose not work so no pic if you have any more questions i will be happy to help. best regards Sam

Hi mate you want a forward vision metal mickey under water version or the xtreme moondance.

Hi ive got a metal mickey on my house and believe me there a bloody brilliant camera never had any problems at all. Im using a standard wall mount and its just as easy as a static drill you holes,run your cable,mount the bracket,plug your cable in to the mickey then bolt down easy as. i recomend it with all my heart and the service a fv is great aswell hope this helps best regards Sam.

Hi Joe i had the same prob with a 2050 after powering up they will go through a test routine i assume thats why its moving. and they do have a green led to tell you if you have power and data.If you have no picture the internall dome might be shorting to the housing and the cable will get verry hot if this happens. Also have a look in the amphenol connector it might be that the video cable has snapped off.Another thing dennards are only supposed to run on 18 volts ac but i have mine on 24 so hope this helps best regards Sam

Mark mercer use meridian protocol if you are torn between baxall and bbv go for bbv the are much more reliable and do more for you many differen protocols in them hope this helps .

Hi have you looked at vicon surveyors or honeywell domes these are great domes also kensplace is right if you want true performance go for a pan/tilt head.you can wipe the rain of them but not on a dome hope this helps

Hi personally it sounds like the tilt moter is buggered sorry but hope this helps

Hi i think it could be the iris thats closed down you can manually overide it but im not shure how to do that hope thi helps

Hi what you really need is a housing with the pcb then everything shuld be hunkydory hope this helps

Hi thanks for that im actualy in england but have relatives in the us best regards sam

Hi i have a sensormatic speeddome and have blown a chip in it wondering if anyone knows where to get it fixed? any help will be much apriciated thanks sam.