haroon552

Thank you very much Delia,I appreciate your help my issue resolved. you have done very good job. and one more thing when my dvr was in working position i saved configuration on usb. regarding that configuration file that indicates this dvr is from jovion company i sent you an email with configuration file and uboot screen and board image.

DEAR ADMIN COULD YOU PLEASE HELP ME I buy this dvr in local market the model written on this dvr is EVERFOCUS EFC 3004hd but inside the dvr motherboard is from other vendor . I put the recovery usb firmware in usb disk and restarted dvr it shows after boot firmware is flashing do not unplug power ,but after3 minutes it went off and stop on uboot prompt Hisilicon # and was giving message WARNING BAD CRC then i type saveenv and press enter it saved . Now all the uboot environments variables are deleted and booting till Hisilicon # and recovering, i don't have firmware for this card. Card Model number is MBD6004D. Can any body can help me to come alive my dvr. And if some one have this type of card can give me dump firmware. This is the link for dvr motherboard picture http://www.sunywo.com/Product_View.aspx?id=27

Dear Admin I Have a Floureon DVR 4ch, the problem i am facing about webgui , I can open the webgui through web browser ( tried all browser 32bit 64bt) and plugins also. but i cannot acces anything from web even i click on any thing in the browser it is not opening. I tried with the floureon people i think thay have no interest to give their services. can you help me please?