Hello to all!
I bought the N6200-8E, the model is mark cotier.
When arrive a try to update the firmware with the last 20150124 found in the URCCTV web site.
After the update the NVR BRICK!!! I think because I didn't unplug the network cable.
I read this site, but isn't simple to find a correct procedure for un-brik the nvr.
The unique procedure work for me is that:
Create a USB key FAT32 with the telnet recovery zip with versione 20140416.
Start the NVR with an E-SATA HDD connect, but without any USB KEY. in this mode the NVR start with IP
I discover in lan the IP 192.168.1.188 and after ping I connect with TELNET.
Plug the USB Key prepare with the correct file
Use the procedure TELNET for recovery and all now work!!!
I see on the cotier web site, the last firmware is 20140416, but in URCCTV is 20150124!!!
How can upload correctly the last firmware? Can I put the firmware I found in URCCTV site?
When I try to update firmware the nvr say me "The file is not valid..." somethings like that.
I hope help someone for the my little experience for un-brick the NVR, and ask you if you can help me to understand.
Inside my box NVR I found this: