sfmartin

Dear colleagues, I recently bought two Dahua IP cameras, model IPC-KW12W. The ones I bought do not have P2P functionality, which is something that I need for this particular customer (firmware "2.420.0000.0.R, build : 2014-09-24"). After investigating a little bit through this and other forums, I was able to download a newer firmware that apparently incorporates the P2P functionality and also supports this camera model. The firmware name is "DH_IPC-HX1100_Eng_P_P2P_V2.420.0000.0.R.20150601.bin", and the ftp site, where I got it, is: ftp://ftp.asm.cz/Dahua/kamerove_systemy/_Firmware/04IPC/support_P2P/HX1100/DH/1506/ I already contacted the local supplier to get an "official" firmware but so far I did not get any positive answer. Before I try the one that I have, I would like to know if there is someone that has already tested this firmware in this camera and can confirm that it is working properly. Any comment or suggestion will be much appreciated. Thanks and regards, Sebastián

Hello Everyone, I am new on Dahua products. I just bought a Dahua NVR 3116. I am having some problems configuring the DDNS as the configuration is removed everytime the NVR restarts. I want to upgrade its firmware to the latest version available to see if this fix the problem. The FW version the NVR currently has is: 2.610.0000.5,Build:2013-5-25 (Serial No. PA3EP04200081). I was reading most of this post and what I could see is that the latest firmware available for this NVR (PAL version) is "General_NVR3xxx_Eng_P_V2.616.0000.0.R.20140110.bin" Can someone confirm if this is correct and if it is working properly for this NVR? This is the link where I got the firmware from: ftp://ftp.wintel.fi/drivers/dahua/NVR-sw/NVR-3XXX/ Thanks for your support! Sebastian