Hiya,
Wondering if someone can help with skipped frames on record/playback.
I have a n6200 16ch version, with 2 hikvision cameras. I applied the latest firmware mentioned in this forum 2015-01-24 and installed a WD blue 1TB hard disk. Both cameras are running @ 1080p/25FPS
Network perspective, the two camera's are running off a GB PoE switch, the NVR was plugged into a cisco switch 100MB, I've moved the nvr to run off the gig switch also in an attempt to resolve. I've also checked the nvr channel settings to make sure frame rate etc are set just like the camera is - none of this has made any improvements.
I don't suspect the drive at this point, it was brand new. I also have a synology 2 bay with some smaller WD blue drives and had no issues at all when the cameras where using that for storage before the NVR came into picture.
In every capture it seems that I get skipped frames when I watch the timer on playback it is a bit random but as an example, 1,2,3,4(pause), 6,7,8 - quite a few times cars/people vanish which is a bit annoying.
Anyone else had a similar issue?
