billkater

I am looking to buy a new 16ch NVR system with at least 12 cameras. I have seen lots of GW systems on Amazon and Newegg. Any suggestions? Budget $2000 +/- POE based Thanks Bill

Thank you very much.....

I have the N6200-8E model. Hardware Version V4.0 Master Version V4.0[20150124] Is this the latest firmware or is there something new out there? Thanks Bill

I have the regular foscam cameras. I have a Web page setup at my house to view my foscam cameras so I know how to set it up. I get real time video on mine. Set page to refresh every 30 seconds to counter act freeze ups.

I am looking at 4-6 cameras. So I will have to use a nvr or dvr or a laptop with a Web page

Right now I have 3 Foscam cameras. If I could use these it would be a plus. If not then I may go with the Hikvision. i have used these before. Or maybe just a cheap used laptop with a web page setup to display all of his cameras on it. Cheaper the better is the budget. Disabled vet with limited income. But I want something that works.... No having to fiddle with it every other day or so.

I use ipcamviewer pro on my android phone. Don't think it would work for him. I thought about a laptop and a Web page with the cams on it. But worried about him messing with other stuff on the laptop. Anyone know of a mini nvr would boot to the display screen? Also how reliable they are.

Hello all. I am looking for something to display IP cameras for a older man. I do not need to record. Or do I need anything fancy. The simpler the better. The best thing would be to be able to hit the power button and all cameras shown on the screen. No log in or anything like that. He was using a Zmodo system until a power surge fried it. I would like to use a IP camera so I would only have one network cable running to the nvr (hide switch in attic). Thanks for the help Bill

yes please send me a link to it

Pulled this from the Mini NVR question post on page 52 http://www.cctvforum.com/viewtopic.php?f=56&t=39628&start=765 posted by redders http://www.cctvforum.com/memberlist.php?mode=viewprofile&u=44179

I made a new post that list the i protocols I have found. Check it out and help with finding the new ones... http://www.cctvforum.com/viewtopic.php?f=56&t=46055 I have searched thru some of the treads and downloaded the different ix protocols and placed them on my dropbox. I did this because it seems it is so hard for everyone to find the protocol they need. I am also going to add the firmware versions to the list. If you have a link to download either the protocol or firmware, post it here and I will add it to my dropbox. I will also link to the original download pages if I can still find them. Just trying to make it easier for all to get their mini nvrs working like they should. Disclaimer: I have not tested any of these or guarantee they will work. Use at your own risk. https://www.dropbox.com/sh/ggnp0vodplxux7q/AADuEJzbEWcBUJ7U6ZkNeIY2a?dl=0

I have searched thru some of the treads and downloaded the different ix protocols and placed them on my dropbox. I did this because it seems it is so hard for everyone to find the protocol they need. I am also going to add the firmware versions to the list. If you have a link to download either the protocol or firmware, post it here and I will add it to my dropbox. I will also link to the original download pages if I can still find them. Just trying to make it easier for all to get their mini nvrs working like they should. Disclaimer: I have not tested any of these or guarantee they will work. Use at your own risk. Here is the link to my dropbox https://www.dropbox.com/sh/ggnp0vodplxux7q/AADuEJzbEWcBUJ7U6ZkNeIY2a?dl=0 Here is a link to firmware updates from URCCTV http://www.urcctvstore.com/Download.html Added a file with telnet instructions to my dropbox

My guess is a hardware failure now. I cannot reach it with TFTP. Working on a return with the seller

I have a friend that wants me to setup some cameras for him on his green house. I am needing to install 5-6 right now so I figured a 8 channel system. There will be 4 outside point to the driveway and plant area. And a couple in the inside sales area. I have 2 kits picked out. Anyone with pros and cons of these? How slick and user friendly is the interface for each? Any other suggestions on systems? I want to stay with a NVR POE based system to simplify wiring. Plus if he wants to upgrade to a Hikvision or Dahua system later all the wiring is pulled. I personally have a Hikvision system with 6 cameras at my home. But his budget wont allow for this. system #1 Funlux http://us.funlux.com/8-ch-all-in-one-spoe-nvr-system-with-1tb-hard-drive.html system #2 Zmodo http://www.zmododirect.com/new-8-ch-all-in-one-720p-nvr-system-1tb-hard-drive-with-8-ip-cameras/ Thanks for the help

Thanks. I will hop over and check it out