ttplayer4life

Droop.., Consider running ivms4200 PCNVR (32 bit software) on a separate PC. Run imvs4200 client on another PC as using it in "live view" (which I assume u are doing) imposes a very heavy cpu/gpu load. Other option to try if above is too expensive and if problem occurs regularly every two days: reboot every day so system doesn't crash.

Drrop.., Consider running ivms4200 PCNVR (32 bit software) on a separate PC. Run imvs4200 client on another PC as using it in "live view" (which I assume u are doing) imposes a very heavy cpu/gpu load. Other option to try if above is too expensive and if problem occurs regularly every two days: reboot every day so system doesn't crash.

1. Ran fine on i3 system, 64 bit Win OS with PCNVR, v1.02.00.03 Cam201: Hikvision 2032, v5.2.5 Cam202: HK 2232, v5.2.0 2. Tried to add Cam203, English HK2232, v5.2.0 Under "Main View", get error code 24 (live view failed, channel unavailable) for all cams. Digging further by direct static IP access on browser: a. 2032: account locked b. 2232: network access error On both chinese cams above, get a "login failed..error 153" under remote configuration. c. I CAN see live view for new English 2232 on browser via static IP! Did Hikvision block my Chinese cams??? Any help appreciated!

Hi, all. I'm trying to connect a Hikvision DS-2CD2032-I to my Costco Lorex LNR380 NVR. HK camera is a V5.2.8_141231 Firmware V5.2.5 build 141201 LNR380: DHCP enabled v2.2.7, Build 131281 IP address & IPv4 Address: 172.168.0.101 IPv4 Subnet mask 255.255.255.0 IPv4 Default Gateway 192.168.0.1 Server Port 8000 HTTP Port 80 Mobile port 100 Internal NIC IPv4 address 172.168.1.1 Lorex cameras are MCNB2153 Firmware V5.0.0 Build 140121 Manage Port 8000 Protocol LOREX IP addressed assigned range from 172.168.1.x where x = 2 to 10 I have tried following: a. Mike Gerard method: 1) I had no problem connecting my HK to switch where my router automatically assigned an IP address. Used SADP to get IP address and set DHCP. 2) I changed password to match that for LNR380 with "admin" the same. 3) I got Disconnected message. b. jiunng method 1) Left HK camera in DHCP mode 2) Matched admin PW 3) Changed camera to "manual'; protocol from LOREX to "ONVIF" 4) Changed port from "8000" to "80" 5) Changed HK IPv6 to DHCP. 6) Left the previous assigned camera port at its present 172.168.1.2 7) Tried leaving HK to automatically get its IP address AS WELL AS assigning it a fixed IP address to 172.168.1.2 Still getting Disconnected message. Thanks for any comment, advice on what else I can try.