clive

That took care of it, I just connected one camera and have only one camera enabled, it's been running for over an hour, before it would reboot after about 20 minutes. Thanks again for all your help. Clive

It only reboots when geovision is running, I have disabled video loss beep, but have 9 cameras enabled, but none connected, I will disable all cameras and see what happens. Thanks for the info

Now the DVR shuts down on it's own. I do not have any cameras connected right now, but left the machine running, after about 20 minutes or so the unit will power down, any ideas?

Thank you. It worked. I appreciate all you help. Regards, Clive

I have a geo vision gv800 system. I have 2 hard drives in my computer, they system hard drive is 40gb and holds windows, I have a 160gb hard drive installed with the geovision software installed there. When I start geovision, it records to the smaller hard drive, when I try and set the recording path I can only choose the small hard drive, I have no other choice listed. Please advise, Regards, Clive

Has anyone had luck viewing remote dvr's on their smartphone or pda, or blackberry? I can connect to the page, but it won't show anything after that, it act's like it won't log in, I have a blackberry 8100 pearl through T-mobile and I am using the blackberry internet plan and am able to receive EDGE service. Thanks, Clive

I finally got in touch with someone named effie at wave-p, she was very helpful, and worked very hard to get this problem solved. As it turns out there was a file that needed to be replaced, she emailed it to me along with instructions how to replace it and then to restart the software, worked like a charm!!! Thanks to all who tried to help me. Regards, Clive

I finally got in touch with someone named effie at wave-p, she was very helpful, and worked very hard to get this problem solved. As it turns out there was a file that needed to be replaced, she emailed it to me along with instructions how to replace it and then to restart the software, worked like a charm!!! Thanks to all who tried to help me. Regards, Clive If anyone has the same problem PM me and I will send the file to you.

I finally got in touch with someone named effie at wave-p, she was very helpful, and worked very hard to get this problem solved. As it turns out there was a file that needed to be replaced, she emailed it to me along with instructions how to replace it and then to restart the software, worked like a charm!!! Thank to all who tried to help me. Regards, Clive

Do you have the ether9808 or the eyemax?

I have the same problem with an ether9808 DVR card made by wave-p Wish I could help, if you find out anything will you please post it here? Have you tried eye-max tech support? I tried with wave-p but they will not help end users or individuals only their "agents".

Did a google search and found this in the first listing...hope it helps Alpha Systems Lab 17712 Mitchell North Irvine, California 92614 UNITED STATES Phone: 949-622-0688 Fax: 949-252-0887

I got a hold of them via msn messenger. pm me if you want the contact info, it won't do any good to contact them, but maybe if enough of us contact them maybe they will take notice, I doubt it, but it is nice to dream.

I tried the new software and I tried to contact wave-p neither worked. I still have the same problem with the new software, and wave-p said they only support their agents, not the individual users-waste of time

Lorex is not very good