CharlieB

As 5mp is going to be well above 1080p i would suggest lowering the camera resolution via a web interface before connecting to nvr

here is rtsp link http://www.urcctvstore.com/Download/20150808/Enable_RTSP_protocol_20150907.update nvr only works with h264 format and think old sricam use jpeg or mjpeg.

Default ip is 192.16.1.188 You only need to forward ports if accessing from remote location. If you have an android phone use fing to see if nvr is live on your network.

When i upgraded to the latest firmware both video outputs stopped working, loading screen would still show but disappear when camera views should have been displayed, downgrading firmware did not restore displays. Fixed by using Internet Explorer 192.168.1.188 as that is default unless you have changed it. Install active x control as prompted them reset via local settings.

got display back by using ie to reset all nvr defaults

Did anyone who lost video output after firmware update manage to resolve the issue ? if so how ? thanks

i used the wd drive recommended until it failed, have since used a different wd drive and also old laptop drive via esata.

Hi maara You need to change the stream (4x[1280x720]). This first part has to be equal or greater than the resolution of the cameras.

I use an esata cable with an extra usb lead build in for extra power and that works fine http://www.ebay.co.uk/itm/2-5-inch-Hard-Disk-Drive-HDD-SATA-22-Pin-to-eSATA-Data-USB-Power-Cable-50CM-ne-/181871840897?hash=item2a58680e81:g:OQ4AAOSwQTVV-M62

same issue all outputs dead

new firmware finally available at... http://www.urcctvstore.com/Download.html

Firmware you are after is available here http://www.unitoptek.com/?article=detail&id=133

ensure nvr port is forwarded in your router and mobile data is enabled in goolink app.

personally i would ditch using ie with nvr. nvr only works and not very well with ie and not with other browsers including w10 browser. in windows use free vms software that allows you to change settings and view streams from nvr. On android use goolink app. many hours have been wasted trying to use browsers when the alternatives are way better.

goolink site is working