glop

I've 3 cams 1 with the IPC_HI3518E board and the other 2 with a other board from the same company www.xiongmaitech.com (jufeng). I wasn't able to get motion detection working with all of them with the n6200-e8 nvr (using i12 or Onvif). After some more tests I found out that as soon a password is set in the cameras (admin or other account and passwords added in the nvr for the cams as well) the motion detection immedeatly stops working with that nvr. If I remove the passwords in cams and the cam settings in the nvr motion detection works perfect again. Can some cross check that and maybe inform some nvr developer about that issue? Glop

Install the I13 protocol and add the camera using this protocol, that should make it work. Here you can download the protcol: https://www.dropbox.com/sh/ggnp0vodplxux7q/AADuEJzbEWcBUJ7U6ZkNeIY2a?dl=0 @kurben Thanks for the quick response. But now I've another problem in the nvr I've now the i13 protocol but how can I change to i13 in my camera? The nvr search finds it only as onvif camera and when I chang there the protocol to i13 I've no picture. Glop

Hi I've also a mini nvr N6200-e8 unbranded my problem is as for many here the motion detection dosent record at all. My hardware: Cam: http://www.ebay.com.au/itm/Security-Wireless-Wifi-Outdoor-Waterproof-P2P-IP-Camera-LED-IR-Night-Vision-CCTV-/381225999493? Firmware: General_HZXM_IPC_HI3518E_50H10L_S38_RT3070_V4.02.R12.20150317_ALL.bin Manufacturer of cam electronics and firmware: http://www.xiongmaitech.com/en/ Nvr: Firmware: 8CH_Mini_NVR_V4.0_20150124_Firmware http://www.urcctvstore.com/Download.html The camera motion detection works perfect with the cam manager on the laptop but on the nvr it dosent work at all. Did anyone got this combination cam/nvr to work with motion detection? Glop