topchips

Hi The Hik ddns server is being discontinued, so you will need to update your camera Firmware for you to enable the Hik connect function,if your model camera allows this , its almost like a P2P connection, camera must have this function for it to work on the Hik connect server other option will be do get a new Hikvision NVR with the Hik connect function on , all the new models will have this , then connect the camera to the NVR and view the NVR on the app also you could purchase a ddns domain , through dyn.com for example then do port forwarding on you router (if your ISP allows ) and view your cameras remotely that way, I would recommend changing the default port of 8000 and use a secure password, but it will work hope this helps regards

Hello If I remember correctly you cant update CH stock, we had a few 2 years back and we couldn't,Hikvision makes specific FW for the Chinese market , what is the problem with the cameras why you want to update them?, best to purchase from a accredited supplier with the local Firmware Regards

Hi A standalone NVR is build for purpose , Pc based has many back round software and drivers running also Pc based is not as reliable as standalone too many things can go wrong, I always believe for security purpose the equipment needs to be reliable no point you have 30 cameras but when you need footage there is nothing there, just my opinion , I would definitely recommend the standalone NVR for your application use the PC as your viewing and management station Regards

Hey According to Hik it wil work through the HIk connect, hope you get it right, Dahua is allot easier setup Regards

Hi Have you given the PC a static ip address? the best I have found is to use a standalone DVR/NVR to do the recording and the IVMS to manage and do the viewing and playback Regards

Hi have you tried telneting in (PUTTY) Regards

Hi I had a similar issue , I reloaded my PC's Graphics drivers and that fixed the problem, hope this helps Regards

Hi with Hikvision it should be able to do the Smart event push notification will test it for you and let you know other option will be Dahua, with there simple P2P function it works brilliantly , will only work with the Paid app though Regards

Hi First you must see what formats your DVR can take Eg: HDCVI, TVI, AHD then you know what camera you can go for Regards

Hi Rather go for the Top brands , like Dahua or Hikvision, you will get better support and quality , http://dahuasecurity.com/products/allProducts/100 what resolution cameras would you like to run?, the NVR you would need will depend on the camera resolution you want to run, no point going for a high end NVR if you just gonna run 2mp cameras Regards

Hi with a POE NVR you will need to manually set the Ip address of the POE network to the same range as the cam or vice versa ,it should power the camera either way, when using the same brand IP camera as the NVR, the NVR will automatically set the ip of the camera for you Regards

Hi You can use a USB splitter to connect multiple mice to the DVR making sure the mouse don't need drivers like a Microsoft mouse, I have found the Genuis brand works very well

Hi What format is your dvr recording on? try using the player software for your DVR alternatively use Dahua's smart pss https://dahuawiki.com/images/Software/SmartPlayer/general_player_eng_win32_v3.41.0.r.161031.zip hope this helps

Hi , try connecting the HDD in a PC and format , the previous DVR could have locked the space or partitioned it, also test with another HDD to see if you get the same, alternatively do a firmware update Regards

Try defaulting the unit and set it up again , had the same problem before and that sorted it out, also try updating the firmware

What are you using to connect to the camera, P2P or Dyndns? try updating the Firmware of the camera, uninstall and re-install your GDMSS also test with the free version if there is a difference

Hi , there is a group of people hacking into Dahua DVR's all over the world, we are experiencing allot here is South Africa, traced the IP to the UK, what you need to do is disconnect your DVR from the network, do a complete factory default, add two new users and passwords , delete the admin user, change ports and upgrade your firmware before connecting it back to the net,

log into the camera and make sure under event setting, motion detect is enabled and your schedule is setup

Hi, Check what your model number is either underneath or on the back of the DVR to see what firmware you need

Hi All I'm busy testing with a Dahua DH-NVR4432,DH-DVR1604-HF-A and a DH-DVR5108H to record to a FTP server that I'v set up on a TP-Link Model No. TD-W8968,I have set the TP-Link like attached the NVR/DVR I have set like this and it gets communication The application is to record to a portable HDD on the TP-Link as a back up recording if the NVR/DVR gets stolen, its similar to a NAS drive or a ftp server on a PC just allot cheaper if I can get it to work I am testing with a 4GB USB at the moment don't know if that will make a difference, I can access the usb from any pc on the network, the NVR and DVR's are also connected on the network and configured, the only thing i am not sure about is the Directory that I should use, I have created a file called "test" on the USB, the schedule and recording has been set, however still no luck usb is remaining empty no files or even snap shots What am I missing?your help will be appreciated Regards

I have two dvr's build date 2011,2010 both on different sites which email function worked fine. It stopped working about a month ago. I have double checked the settings using ssl 465 and tls 587 on smtp.gmail.com and have even tried hotmail account to test. If i use the same settings with email ports etc. on newer dvr build date 2012,2014,2015 it works fine. Anyone else has this problem? I really have no idea why it would do this...

Good day So you gonna be running a total of 330MB/S, I don't think you will have any issues if you are using a giga-bit setup worst case you can put 2 switches at the last point before the NVR so sw1 to sw2 to sw3 to sw4 and sw5 to sw 6 to nvr, if you know what I mean, but still think you will be good to go, im doing a 80 ip cam setup the same way next week will tell you how it goes Regards

Good day How small do you need the device to be? I have taken the main board out of a Dahua NVR and built it into a smaller box with a 3g dongle for remote access work well Regards

Good day Just do a screen shot and send that, I believe the share button is to share the APP Regards

Good day Are you running these lengths with or without power? (is power separate?) have you tried using ground-loop isolators? with proper cable you should be able to run 500m no problem, going from coaxial to Ethernet can work but might cause even more issues, power could be your issue here, you do get boosters like a active balun Regards