bullhound

I will really appreciate your help, which com port dose the cable goto also the cable did you use a standard RJ45 to db9 straight serial cable or did you custom made it. Thanks We programmed COM5...again someone will have to program the Ruby 2 COM port for the virtual printer. We use a standard ethernet cable from the Ruby 2 to a RJ/45-DB25 adapter. We pin the adapters ourselves. Pin2-Orange...Pin3-Blue...Pin6-Black...Pin7-Yellow...the rest I don't use. That DB25 plugs into the Parallel Port to Printer/RS-232 (DB25) Female on the V3E. Hope that helps!

No Still searching for a solution Geo was not a big help, please keep me in loop if u find a solution. Thanks We finally got it working. We had to change the baud rate to 1200 and data bit to 8 on the V3E. The port has to be configured on the Ruby 2 correctly as well....it has to be set to the DVR something...sorry...we use a petroleum service to set that part up so I can't help much there. If I get more info, I'll post for you.

Did you find a solution to this? We just recently installed the Ruby 2 and cannot seem to get the Geovision V3E to work correctly. We tried using the same configuration from a Sapphire/Ruby but it won't work.