Jump to content

donmc512

Members
 View Profile  See their activity

  • Content Count

    3

  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. donmc512
    The cable is a bit of a tough issue since it is buried. Is it possible to offset the power loss by going with POE plus??
  2. donmc512
    My wire is 24 awg, direct burial, gel filled. I also re-terminated both ends when I started experiencing problems.
  3. donmc512
    I had a Dahua IPC-HFW5302C running off POE on a 600 ft Ethernet run. And yes I'm aware that exceeds the 100m limit. Literally overnight I lost signal on the camera. I have tested the 600ft cable run and it tests good. I have brought the camera back to my house and it tests fine, I have switched to a new IPC-HFW4300S V2 just to see if that solved anything. I'm thinking it is power related. I put a POE tester on the run and it shows 44V, .05 A and 2.4w, The camera spec says it uses up to 6w but does not specify a minimum. I ran the link for about 8 months without a hiccup. I have tried an EnableIT extender but the result is the same. Any ideas....
×