Hi everyone
I just bough this ZOSI system for my home:
http://www.amazon.com/gp/product/B00MN5B478?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
I have a couple of questions about it if anyone can help.
1. I am trying to run a cable from the video out through the existing cable in my home to a TV in my bedroom. The cable is RG6 I believe and I have tried placing a BNC connector on one end to plug in to the ZOSI unit and then connecting straight into the TV tuner cable spot on the TV (RF connector maybe?) That didn't work and I read that the signal was not the right type so I cut off the RF connector and placed an AV connector on the end of the cable and plugged that into the video port in one of the component spots on the back of the TV. I could not get that to work either (no signal). I thought maybe I didn't put the BNC connector on right so I plugged the bare cable into the ZOSI box but that didn't work either.
If its not obvious by now:
The box works fine by HDMI but I don't want to have to run an HDMI cable all the way through the walls to reach the TV as the coaxial cable is already installed. Any ideas on how to fix this? Should it work if I have the connectors installed properly?
2. If anyone is familiar with the ZOSI system: When I search for Wifi networks, nothing happens and I can't connect to any wifi. Any fix for this? If not is there a way to upload a third party firmware or software to the ZOSI box that works better?
Thank you so much for the help!!!