logicrussh

i saw recently a post where someone ask about "Signature settings" and someone reply that there's some limitations and you need to have over 20 post to get access to the Signature settings, i already reach that but i still cant get access to.

Hi, on my job i have 22 cameras installed, i installed all cameras like 2 years ago, but a couple days ago one of the cameras is doing something weird. The problem is on one dome camera (DAHUA) before the camara was OK, but i noticied that the view was a little bit zoomed. Now sometimes the camera changes something on the configuration by itself and the view changed (The camera looks amazing when it happens, the view is more expanded, and the image quality is much better than before) but then in about 1 or 2 hours it comes back to the initial view. By the way, i enter the web configuration for this camera and cant found anything related to that. Could be this some electrical issue? (Not enough power) its weird because the camera looks zoomed since we installed it. Hope you can help me, and sorry about my english, i put my best. Thank you.

Any ideas of what could be causing this? KRxyOvyv9Sc

There's no such option on the DVR... All i saw was color adjustments bright, gamma, sharpness, etc..

One of the cameras has this blue image. until i turn off the power supply and turn it back on, but, few hours later it comes back to blue. Any ideas on whats wrong whit it?

DVR Brand: DAHUA Specs: 16 Channels HDCVI 720P / 1080P / ANALOGIC / 2 IP / 4 AUDIO / HDMI / VGA / P2P / 2 INTER CAMERA Brand: DAHUA Model: HFAW2200B36 Specs: HD HDCVI - 1080P / 2 MP / 3.6 MM Lens / SMART IR 98 ft / IP66 / 12VCD

i recently changed one of my cameras because it got blue image everytime it changed to nocturne mode. Now that i have my new camera i have some problems too. The problem is, everytime the camera tries to change to nocturne mode, the image jumped between filters again and again for the eternity until it comes back to normal mode. The camera is like 328 ft away from power supply. That camera is connected directly with a 12V power adapter. BRAND: DAHUA MODEL: DH-HAC-HFW1200BN-B-0360B Help please

I'm not an expert on cctv so, how can i log in into the camera ?... at the moment so far, i got this: but there's no Day/Night option on it. after searching on the web, i found this tool, where now i see that option with 3 options wich are: Color, Auto, Black and White. but the problem is that when i selected "Auto" by example. it doesnt save it.

Can't find that option that you mentioned, i don't know if there's some way to get that option on NVR or from the WebPanel. I'm gonna attach the pic of the web interface and a video that shows the problem. hope you can help me, because this is driving me crazy VIDEO: df9ab6HR9mU

..

Couple days ago i asked for a problem that i had about blue image on one of my cameras, now i saw the playback video of this particular camera and i found this: One day the camara is ok then it changed to Nocturne mode, all good at this point, but when the camera comes back to normal mode it has little red/blue image on it, then it increase to the point i get blue image totally and it stays there all days until i turned off the power supply. Any suggestions on what can i do to solve this?

i have 11 cameras connected to the power supply, the model of the power supply is "SAXXON F12V10A18C". Specs: 18 Channels Input: 100-240 AC. Output: 12 V DC. Total Amperage: 10 Amp. Max. Amp: 1.1 Amp/channel. The problem is that one of the cameras has blue image, everytime that i turn off the power supply and i turn on again, the problem has gone, but in about 4 or 5 hours the problem is back again.

yes, i already did that, without luck.

You can see how the cable colors are on the rj45 female connector.

viewtopic.php?f=6&t=29292

oh, sorry ma'am , so at the end you bought those power cords?

You're welcome sir.

I tried to help you, but i'm not an expert in here, im just another user like you trying to help, i have now a problem with some of my cameras (blue image) on it, and i solved it, just changed the power cable to another position on the power supply, but i never had the problem you have now, so im trying to help you. Sorry if my answers not was what you are looking for.

Im having a problem with one of my cameras, i got 10 cameras on a DVR, but one of those is sending blue image to the screen, i dont know if this could be a problem with the power supply or some kind of interfierence. Can you please help me with this? some other data: when i turn off the power supply, al the 10 cameras send high quality image and everything is good, but in about 4 or 5 hours one of the cameras gives me this problem (Blue image), thats the only camera with that problem so im starting to think that the problem could be that camera specifically. Hope to get an answer and im sorry about my english level

Now i changed the power cable of the affected camera to another place on the power supply, everything seems to be good now, i'm going to wait a couple of days to see if that was the problem.

So, do you tried new cables?

Agree, great forum too me.

Hi, hope to get useful tips/help of you.

Can i get the DIY'er rank?