Seymore

Greetings all. I recently purchased two of these cameras and find them very nice all around. Does anyone know if there is any way to add lens to these cameras? There is limited information available other then a setting for DC: " when using DC drive auto iris lens. If select DC mode, you can adjust the desired level(brightness)" In the limited manual under specifications lens section it refers to A: 3.5-8 mm MI Lens but I have no idea what this means. It also mentions B: 16mm Fixed Lens and C: 6-15mm Fixed Lens. I notice I can unscrew the base so maybe there is a way to disessemble this camera for a lens change. If anyone can enlighten me I would be grateful Thanks. Seymore.

The first thing I would do is install a motion detection flood light. Combined with an audable alarm, signs alerting of the ownership of firearms and so forth I don't see how anyone would elect not to flee.

I have been considering replacing my 4 camera Netpromax with the NDRX608PCI but I am unfamiliar with what cables I will need as the inputs look different. Can anyone tell me if cables are supplied with the card or should I look somewhere for what I need. Thanks for any help or tips. Regards, Seymore.

I need to know what I am supposed to type in to access my card over internet. My Netpromax is set up fine and works over LAN but I am unable to see it over Internet. Thanks for any help. Seymore.

I have the same condition when I run FXClient on laptop. Everything works fine on the PC where the cameras are attached. I do not see any option to turn off Direct Draw within FXClient. The video cards are all ATI. The one on the remote desktop is Radeon X850XT and on the Laptop ATI Mobility Radeon9000/9100. There is an "overlay" selection that displays a warning "The overlay controls are automatically activated during playback of any video file type that supports overlay adjustments." This warning is present on both desktop and laptop. If this is a Direct Draw issue then would I need to disable it some how with the PC? Thanks for your help.

I am not able to see image on LAN connection using FXClient when connection is confirmed via Netstat. Everything seems fine and logon is sucessful but in steup/Camera all I see is a blue screen on each camera view. I have no firewall activated on either system and everything tells me all is working as desired I an unable to get this to work for me. Has anyone had this problem and knows what could be wrong? Thanks for any help. Seymore