racer88

Hi all. First time poster. I had a home security camera system installed several years ago. The company that installed it is no longer in existence. Only two cameras (out of eight) are working, by looking at the monitor. The two that are still working (both indoors - garage and office), look like this: The other 6 cameras (outdoor) are of the variety shown in the images here. I cannot find any identifying markings on them. I took the dome off one and took these photos. I captured several angles to hopefully help in identifying it. I could not figure out how to remove the camera or mounting from the ceiling. Here is the DVR and the connection box: Can anyone here help identify the problem? Is it possible that six cameras all have failed? If so, can you identify the camera and tell me how to remove them, so they can be replaced? Or, is it something else? Thanks much!!

I'm back. I ran a cable from the video output on one of the cameras directly to a monitor. No signal. I suppose that means the camera is dead. I wish someone could help identify the camera AND how to get it unmounted from the enclosure on the ceiling. I'm pretty mechanically inclined, but I cannot figure out how to remove it... Unless it has to be done from INSIDE the attic??? In that case, I'll probably "call a guy." It appears that we just need to replace the defective cameras.

I noticed that video output plug on the camera (yellow). I'll need a LONG cable to get it to a TV / monitor. I'll have to come up with a way to check it. Thanks for your help!

All of the LEDs are lit up. The phone camera "flash" masks the appearance of the LEDs in the photo. Thanks. I will consider getting a pro to the house. I'm fairly handy, and if it's just a matter of swapping out cameras, I thought I might be able to do it.