vedardalarm

The security system includes access control system, alarm system, and video surveillance system. These three parts work separately, but they are also interconnected. The linkage of security systems is to transmit more accurate alarm information, take timely stop loss measures, and make the security system more efficient in ensuring safety. For example, intrusion detectors are linked to video surveillance. When someone is detected breaking in, the video surveillance will pop up a screen, and the app will receive an on-site video of the alarm. Fire alarm detectors can be linked to fire-fighting equipment, and when smoke or flames are detected, the sprinkler head will be turned on. Glass breakage or vibration detectors or other audio devices are linked to video alarms. When abnormal sounds are detected in the monitored area, the video surveillance system will pop up a live screen and send the video to the mobile app. How is the traditional alarm system linked to video surveillance? There are two common ways of linkage. Hardware wiring linkage and software protocol communication linkage. Video surveillance NVR normally has up to 16 wired alarm input interfaces, which can be used to connect infrared beam, intrusion detectors, etc. For places where monitoring is the main focus, NVR can be used as the central linkage alarm and access control system for the security system. However, for places where detection and alarm are the main focus, NVR cannot meet the requirements. Whether it is residential security or commercial security, all types of safety hazards must be monitored 24 hours a day and promptly alerted. Therefore, you may need to use numerous security detection and alarm devices such as door and window detectors, intrusion detectors, outdoor infrared beam detectors, vibration detectors, smoke detectors, gas detectors, water leakage detectors, and sound and light alarms. Most of these alarm devices are wireless and easy to install. Therefore, the security system that links access control and video surveillance with the alarm host as the center makes the installation and use of residential and commercial security systems more flexible and convenient. EAVS-2506 is an integrated security controller of alarm video using H.265 video compression. The host supports six POE channels for HD network video access and multi-channel wired, wireless, and bus defense zones. Built-in 4G network module and TCP/IP network module, double network communication, stable and reliable performance. With HD monitoring, intelligent anti-theft, two-way intercom, intelligent home appliances, remote control, centralized management and other features. Widely used in residential areas, villas, families, shops, supermarket chains, office buildings, enterprises and institutions and other fields, all-round protection of personal and property safety.

Hi! I found guide on Hikvision website and think you may need to download the tool software at https://www.hikvision.com/en/support/tools/hitools/cl7f0143d2c781a3e3/ Then reset password and active it.

Hi! I try to answer your question. I am not familiar with the device you have chosen. But general burglar alarm center and cameras can be linked and meet your requirements. Link the driveway camera with nearby motion sensor or front door or garage gate sensor and set into away home area. Well, there is new device with alarm and cctv integrated with app push for alarm with picture. That would be convenient.

Modern wireless security systems seem simple. There is no need to install physical cables, devices are connected in minutes, the system is set up intuitively in a mobile app. Such security alarm system is popular with young people. It does not require a contract with a professional security alarm company and monthly monitoring fees. But security alarm systems are different from household appliances. In order to ensure that the safety alarm works reliably and accurately, its installation still needs to follow some strict procedures. How to install a security system like a professional? 1. Remember to buy professional security equipment. Professional security equipment is generally manufactured by professional security manufacturers. First, you can choose well-known brands of security products. Second, you can check whether the product description includes product features, performance, data storage, anti-sabotage, etc. Third, whether the product seller provides technical services. 2. Remember to study the products well. You can view the products from ebay or amazon and have a general understanding of the types of security products. 3. Analyze your home security needs. The home security includes against burglary, flood and fire. On the basis of the previous product learning, arrange the security detection and alarm devices to be installed according to the three aspects. 4. Location study and radio signals testing. Determine the correct placement of devices including alarm panel. Test the wireless signal interference and make sure the wireless transmission distance is within the range described for product. (generally <=100m or 300 feet) 5. Install the alarm device according to the manual. For example, you need to install the PIR intruder detector at 1.8-2.2m height and if there is pet, you need to avoid the installation angle to exposure to pets.

How to DIY home security? It is easy to buy an IP camera and place it in the living room and remote monitor your home. But it is not enough to secure your home. To completely secure your home and prevent any intrusion, you need to know how to choose the detectors, where to install the detectors and how to set up the home security system. We will analyze the actual case of home security solution. We hope that can help you understanding home anti-theft and monitoring systems.Step1:Determine the scope of prevention according to the home situationFrom Figure 1, we can see that the 2 balconies and doors are in the most vulnerable areas. The second one is the kitchen and the study room windows (because the study room and kitchen are usually unoccupied, especially at night, they are usually vacant, which can easily become the entrance of thieves). The third is the master bedroom ①, children’s room ② and bathroom ③. So we firstly determined the areas that need to be protected. Then we need to determine the priority of the prevention area (the intrusion position is indicated by the priority of the prevention in the figure)Step 2:Determine the defense area and the prevention method and equipment of each defenseAfter the location and area that are vulnerable to intrusion are determined, we need to determine the prevention method and equipment for each defense area. It is better to have all areas protected. But if the environment situation and community security is good, you can only have the main entrance areas protected.1)Basic home security solutionThis security solution only set defense areas of gate, both balconies, kitchen, and study room. Wireless door contacts are used for protection of gate, kitchen and study room. PIR motion sensors are used for protection of living room and bed room.When the gate or study room, kitchen room door or windows are open, or body motion detected in living room and bed room, the detector will trigger alarm panel and loud sound siren strobe goes alarm, at the same time, alarm signal will be sent to mobile phone or security service center.The shortage: When using door contact, the windows should be closed even in summer. Bathroom and children room is not protected and with security hazard.2)Complete home security solutionOn the basis of basic home security solution, one added infrared detector is installed in children’s room, living room and study room, and one door magnetic detector is installed in the window of the bathroom. In this way, we have completed a basic family anti-theft system, and at the same time, double detection equipment is installed in the key defense area (gate and study room)When the gate or the study room, kitchen, bathroom window is opened, or have human body movement detected in balcony, children room, study room, the alarm will go off. At the same time, double defend of different types sensors installed in gate and study room to ensure the defense of the main entrance.The shortage: although all the indoor scope has been in the protection, but the passive infrared detector can only active after the invasion. The perimeter protection of the balcony and the window is not very effective with door contact.3)Improved home security solutionIn order to solve the problem that the balcony and windows intruders can not be prevented at first time. We installed infrared barriers on the balcony and windows, and remove some indoor infrared detectors.So, the infrared barriers outside the balcony and windows can promptly alarm when someone approaches the balcony and the window. Keep the intruder outside, prevent the intruder from entering the room. The improved home security solution can better protect the personal and property safety.Shortages: No video monitoring function and linkage equipment, and unable to use technical means to retain evidence while alarmingStep3: Optional equipment to enhance the prevention functionBased on the above setting, we can choose smart detectors or microwave detectors to replace the above ordinary infrared detectors; add harmful gas detectors in the kitchen, Add linkage lighting control equipment in the living room (when someone approaches the window, the lights in the living room will automatically turn on when the alarm is issued); the door is equipped with a digital anti-theft lock; the glass is equipped with a vibration detector to further enhance the prevention ability. One thing to note is that, while focusing on new technologies and new products, security products should also focus on stable and mature conventional and reliable ability.