rajesh356

I got a old DVR from previous owner which was used for sometime . I powered on its turning on , when i type IP address its asking for Username and password BUT sadly he dont know the username and password , i already tried many default username and password and sadly none worked http://www.cpcamglobal.com/support/manual/CPD560A_560AS_561ASV.pdf when i tried contacting official support they want me to ship it back to them another option mentioned in manual is to connect DVR directly to monitor - but I need RCA LINE with BNC Connector or coaxial Line (As shown in PIC) i asked many shops and none have this -_- Kindly help me reset Password i even opened DVR to find any cmos battery but this model dont have one

i face two problems now 1) Camera #1 its all blued , i removed dust , checked by opening Dome camera , removed dust in casing also checked for dust in Lense , but still camera #1 is fully blured 2) each camera is connected to AC via 12 v 1 Amp Adapter ( x4) , can i use 12 V 2 Amp AC adapter to connect Camera ? (because old adapter is not working )

U R MY Live saver , it worked , it reseted to default IP 192.168.1.10 admin admin thank you vm but unlike other DVR i used previously Managent page lacks many features such as no option to format HDD Show HDD usage managent page is like -->CONFIG ------>DDNS ------>FTP ------>MAIL -->DVR ------>Devices [Camera ;Protocol[Normal/P-D] ;Rate[2.4k to 115k] ------>Detection ------>Time ------>Record Time ------>Alert -->General ------>Log [Logs] ------>Account [Add/Remove Account] ------>Configure [system COnfigure Manage ->Firmware Upgrade Firmware Version : 1158-1012-1021-1014-M1-6C1B

http://null-byte.wonderhowto.com/forum/hack-cctv-private-cameras-0159437/ will password cracking works ?if so what is the minimum size of password ? 4 ? and maximum size of password supported by DVR

Sir , is there any update?

Sir i found T35 but T36 is not near by (please check pic1 there is TR35 & TR36 near by

sir , i turned off DVR-removed PLUG Shorted T4-T5 with Metal CLip Holding the wire firmly i pluged LIVE power cable i heard single beap ( i think its normal beap) waited sometime Removed Metal clip powered off the device turned on , still same

Sir i tried shorting T4/T5 i hear 1 beap for less than a sec when i connect the power cable after reboot i tried admin admin , admin password , admin 0000 but still invalid password , kindly help is my shorting procedure correct ?

After i found out exact model of the DVR http://www.cpcamcctv.com/en/spec/Prod/CPD531-spec.pdf id http://s10.postimg.org/s127vayh5/IMG_20151002_123631.jpg http://s10.postimg.org/ddwnzwah5/IMG_20151002_123636.jpg http://s10.postimg.org/jwu3qkc21/IMG_20151002_124318.jpg http://s10.postimg.org/ndrkfslqh/IMG_20151002_124637.jpg http://s10.postimg.org/76pvdh43t/IMG_20151002_124648.jpg http://s10.postimg.org/shnfhqm89/IMG_20151002_124702.jpg http://postimg.org/gallery/20f3mlndi/

tried , not working i already opened and tried looking for battery like CMOS battery in PC but i couldnt find any

thank you , you mean something like this ? http://www.amazon.in/Coaxial-Coax-Video-Cable-Camera/dp/B00NRQ3QPK?tag=googinhydr18418-21

Is there any way to Reset the password .anyone please

thank you for replying . yes i noticed , but i got 4 cameras also with it , so if i can break the password or the required Cable RCA Line with BNC Connector or COaxial LIne to VGA Female cable for cheap i can monitor with 4 cameras , who would say no to free item ?