Jump to content

royvandewiel

Members
 View Profile  See their activity

  • Content Count

    4

  • Joined

  • Last visited

Everything posted by royvandewiel

  1. royvandewiel
    Fixed. I found another thread where version 5.2.5 was advised and after the update to wait at least 10 minutes before restarting the camera. After waiting 10 minutes i rebooted the camera and heard the IR filter switching. After the boot the camera came back online in Tools. So maybe just luck with 5.2.5 or a little bit to fast with rebooting the camera. Thanks for your input.
  2. royvandewiel
    Thanks for your reply. Unfortunate version 5.2.0 an d 5.3.0 doesn't work because then i get the DS-2CD-Min-System in Tools. Camera isn't accessible. Where can i find 5.1.0 or is there an other solution to get my camera working? I don't understand why i get the DS-2CD-Min-System. EDIT: I found the 5.1.0 on the Hikvision website but i have bad luck. The camera doesn't shows up anymore in Tools, the IR leds are going off and on and the greens leds are also going off and back on. When i flash 5.3.0 back onto the camera the camera is showing in Tools as DS-2CD-Min-System and the IR leds are steady on and the greens leds are normal (1 is steday on and the other is flashing with network activity.
  3. royvandewiel

    Hello from The Netherlands

    royvandewiel posted a topic in Introductions

    I already found a lot of info and tips thanks on this forum and hope the Forum can help me with my camera problem.
  4. royvandewiel
    Hello, I'm from the Netherlands and hope someone can help me with the right software or solution. I have multiple camera's, Hikvision DS-2CD2732F-IS. One camera wasn't working very well (no audio and sometimes a reboot) and i was advised to reinstall the firmware. The current firmware was V5.2.0build 140721. After the firmware update/reinstall my camera was bricked. The IR leds are flashing (went on and off every 20 seconds) and the camera wasn't visible anymore in Tools. I tried many firmware versions via tftpserv but nothing worked. But when i tried IPC_R0_EN_STD_5.3.0_150513 and IPC_R0_CN_STD_5.3.0_150513 i see the camera in Tools but the device type is DS-2CD-Min-System, IPv4 Adress 192.0.0.64 Port 8000, Software Version V4.0.8build 140610. No DSP Version and no Encoding Channel(s). Is it possible that i have the Chinese version? Is my solution version 5.2.5? And can some help me with this version? Or does someone have an other solution or tips for me? Thank you very much
×