Jump to content

onecell

Members
  • Content Count

    3
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. Thanks very much for your help & sorry for my ignorance; although my experience with CCTV is long and extensive, my experience with TFTP LESS so! It turns out the problem was my 64bit Win7 laptop wasn't working with the TFTP software. My ancient XP beast worked properly!
  2. The other way round... Wrong firmware on a Euro unit. Should the DVR start receiving TFTP data as soon as it powers on. I'm sending to the IP address last used on the unit as it's my understanding the settings don't change on a flash. Am I wrong? Should I use another IP/subnet on the laptop. FYI; on power up the unit shows the HikVision splash screen, blanks, shows, at the wrong size, the on screen text for the cameras it was set for, remembering 1+5 view I had set but no camera video, then restarts.
  3. Greetings! Newbie to this forum here so I hope I'm posting in the correct section. Like a muppet, I recently used the iVMS remote console to put the WRONG firmware on my 7216 recorder. Following the reboot, it now starts booting then loops into a re-boot sequence. It doesn't even get as far as establishing comms to use the TFTP program. Is there a way to force the machine to look at the USB drive to grab the CORRECT firmware or is this a "return to distributer" issue? Best Danny
×