Hi all,
I would appreciate it if someone would be so kind to help me.
I have tried everything I can think of but have had no luck, I am hoping someone may be able to point me in the right direction. I cannot view my cctv cameras remotely and also the Samsung smart viewer program has stopped working. All was fine when I had Sky Broadband, Its after I have changed ISP to TalkTalk. I have left all the previous settings untouched in the DVR. I have forwarded the ports to the best of my ability on my new TalkTalk router but I cannot log in remotely to view the cameras. Whilst on the same network, when I type into Internet Explorer the StaticIP address of my DVR, it works fine. When I try firefox a message is displayed that ports 4505 to 4530 need to be forwarded. I have also done that and after logging into the DVR, I am greeted with just a blank screen. Internet Explorer works fine with either ports 554 to 558 (ports forwarded previously on sky router) and on ports 4505 to 4509(ports now forwarded because of TalkTalk router) Also Samsung have the smartviewer program in which I used to input just the Mac Address of the DVR and I could connect remotely but that doesn’t seem to be working.
Any help whatsoever will be greatly appreciated. Thank you.
DVR- Samsung SRD 1670D 16 Channel ISP TalkTalk Router Huwei HG533
DVR SETTINGS
DVR Static IP 192.168.1.200 Gateway 192.168.1.1 Subnet Mask 255.255.255.0 DNS 168.126.63.1
Protocol TCP Port TCP 4505 – 4509 Port UDP 8000-8160 Multicast IP 224.126.63.1 Webviewer Port 80
DDNS Samsung DDNS Host Address is (Mac Address of my DVR .websamsung.net:80)
Router Settings ports i have forwarded
Name DVR1 Protocol TCP Ext Port Start 554 Ext Port End 558 Int Port 554 Int Host 192.168.1.200 Name DVR2 Protocol TCP Ext Port Start 4505 Ext Port End 4530 Int Port 4505 Int Host 192.168.1.200 Name DVR3 Protocol TCP/UDP Ext Port Start 80 Ext Port End 80 Int Port 80 Int Host 192.168.1.200
