RobAberdeen

Hi Guys I have NVR Dahua clone with U-Boot 2010.06-svn1781 after conecting to NVR via rs232 I can see the list of images: da=tftp u-boot.bin.img; flwrite dr=tftp romfs-x.cramfs.img; flwrite du=tftp user-x.cramfs.img; flwrite dw=tftp web-x.cramfs.img; flwrite dl=tftp logo-x.cramfs.img; flwrite dc=tftp custom-x.cramfs.img; flwrite up=tftp update.img; flwrite tk=tftp uImage; bootm Does anybody know what kind of parameter with tftp should use to upload any .img from nvr to tftp server? I tried to use command tftp with parameters like put, upload but no success P.S of course I have got run tftp server on pc - ip -> 172.16.40.98

Hi all of YOU!! I am trying to rebuild romfs-x.cramfs.img to get my local language if anybody could help me it would be great Original FW (General_NVR4xxx_Eng_PN_V3.200.0000.9.R.20150529.bin) for NVR Dahua Clone 4xxx you can download from this link: http://gofile.me/2NRV3/P15Ws9WA So, I researched that fw consists from a few .img files which every part of it I can upload using RS232. The two files are important : custom-x.cramfs.img and romfs-x.cramfs.img and thay can be upload to NVR by rs232 using the commends: run dc and run dr well.....I think until now everything is clear..... From these two files I am interested the most in romfs-x.cramfs.img (inside this img thre is i .txt file where you can change the language). so when I upload just extracted but untuchable file romfs-x.cramfs.img from firmware using command: run dr romfs-x.cramfs.img THE NVR start to work great. It works as new one.....but it is not enaugh for me...... when I extract the file: romfs-x.cramfs.img (to get inside and to change languagefile) I can not build the image properly back and finally NVR does'nt work. I tried to analyze how it should be build. First of all I know that main folder must be compressed mksquashfs with parameters -lzma (I tried also with -gzip) in order to get file: romfs-x.cramfs.sqsh Then I made image from romfs-x.cramfs.sqsh so I used mkimage with parameters: mkimage -A arm -O linux -T kernel -C gzip -a a0060000 -e a0ce0000 -n "3535romfs" -d romfs-x.cramfs.sqsh romfs-x.cramfs.img ...finally I have again the file romfs-x.cramfs.img To check that my file is built the same as original untachable img I used the command: mkimage -l romfs-x.cramfs.img (for both images - original an maine) and I got the same result for both - see the attachment mkimage-l At the end I tried to upload my image using again RS232 by command run dr romfs-x.cramfs.img and.........file is uploaded without any problem, is geting to be extracted and etc , than NVR make self-reset (everything goes normally until now) - see the attachment hangs and THE NVR doesnt want to get running up. When I use the original romfs-x.cramfs.img we have the same situation with the info Uncompressing linux....done, booting the kernel and after 10-15 second NVR works great (you can control it locally or by web) but when i use my .img the nvr hang up and after one minute it try to boot again and again. Could anyone help me how this romfs-x.cramfs.img should be rebuild properly. Thanks of All Robert PS . I tried to rebuild the image using mksquashfs and mkimage with three distributions of linux: Fedora 22-3, Ubuntu 15 and Ubuntu 10.10