l0l0pr

It seems like the cameras have an issue with the new NVR firmware. I have one Escam left and like you I have the same opinion about them, thats why I replaced all my cameras with EZVIS cameras, no matter what firmware I use they work all the time.

What firmware are you using on your NVR? The latest update (20150805 includes i12 by default) seems more stable (at least on i13 protocol) on my opinion. version

I dont think there is one available, the closest I have come is the file named rfs.yaffs.3535 that I got from a Russian site http://forum.videon.spb.ru/viewtopic.php?f=20&t=7815 of someone with the same problem and device, but the only place available for download is from a Chinese site and it won't let me get it. Up and running! I was able to get the right recovery file and a newer firmware for the Hi3535 chipset the 015a_015c_3535_LG_1&2HDD.20150808.update From this site http://www.camseen.com/SUPPORT/Software/ it works good, the only problem is the boot screen is in Chinese but I can live with that.

I dont think there is one available, the closest I have come is the file named rfs.yaffs.3535 that I got from a Russian site http://forum.videon.spb.ru/viewtopic.php?f=20&t=7815 of someone with the same problem and device, but the only place available for download is from a Chinese site and it won't let me get it.

But even after doing all that still won't work, at least for me. The fact that you see the logo picture (right?) means that bootloader is still there which is the one and only part needed for the CPU to boot. I bricked mine also at this stage and i thought it was impossible to recover... after that i attached a serial cable which if you have will tell you 100% the current state, and then i noticed that it didn't found the right partition from USB to boot... then i put the stick on a linux system, formated, made it active, and the voila... it was booting every time!!!.. although it took me several hours more to find the RIGHT image to load as the CPU has some kind of encryption keys to load the firmware which if it is not right it never loads... Thanks a lot for your help! Yes, I see the logo picture. I got the usb formatted and recognized/booting. All I have to do now is to find the right image for my system. I don't think is going to be easy finding the correct image, I have spent hours looking for it to no avail. Regards Angelo

But even after doing all that still won't work, at least for me.

I have the same problem but with the N6100-16HE, which comes with the Hi3535 and the recovery file from URCTTV, is not recognized by the NVR. Can some one help with this issue or point us in the right direction? Regards, Angelo