eddiex666

Hi, Is there any other here that has some expirience about Nigthwatcher HD? http://nightwatcher.co.uk/wp-content/uploads/2016/07/NE400B.jpg I testing it and it does have a telnet, but i havent tryed to connect, i think it uses Hilinux or something.. Any tips for access to it? maybe connect directly with no app? Eddie

I think (I am not shoure), that the error is because some of the settings you have in the NVR is not supported on 1 or more cameras.... I got similary error, but I notise that the settings that I wanted to save actually was saved on the camera.. PS: try to change 1 settings by time.. and click apply.. so see what settings that are not supported... Eddie

Alternativ firmware? Have any1 tryed to use a alternative firmware on the Escam NVR 4/8 ch? I read something about a "XRN0808E_Firmware_03-06-14" firmware, but I did'n understand if this can be used on the Escam??? Greetings Eddie

Hi Coralreef, I have maybe the same problem... I cannot login to web, but I login to telnet (root:a.......) Just wounder how you did a full reset without web? (I does not have any mouse / monitor connected to my NVR at the moment) Greetings Eddie

Hi folks I have read thru this forum, and there is alot of nice info... tnx I have a few Escam Super Mini NVR K104 and K108. The firmware is: Master ver. 4.0 - 20150808 Hardware ver. - 4.0 I got the "latest" orginal firmware from Escam support. However, support is nice, but they cannot answer all my question 1) - storage I wounder... and I have see some answers >>When the NVR is booting it checks /sys/block/sdX/removable. If this is set to 1 (usb memory) I know that USB stick is slow compared to USB disk. But is there a "fix" for using USB stick as storage? (I have 32 GB Kinston sticks witch is quite fast) 2) - app I have read thru the forum and there is a remote protocol on the NVR. icloud witch uses goolink and SANA witch uses Danale. I dont like this cloud access, and want to use direct access.... >>MEyeProHD , meyepro, I have testet and I got it connected, but is there any other app witch is better? 3) - storage type? I see that many people uses the WD external usb disk. >>2TB WD My Passport Is this the best? can the Nvr supply enougth power thru the USB? and how about SSD disk inside the WD cabinet. 4) - TCP ports? >>80 (http), 8443 (https), 1935 (rtmp), 554 (rtsp), 5050-505x? I uses 80, 8443, 1935 and 554 for remote access... What is the 5050-505x used for? 5) - HDMI settings? >>VGA/HDMI display is out of range how can I edit the system files (thru Telnet) to change the resolution? 6) - IR on Escam QD300, QD900 ???? have anyone expirience with those webcams? I would likt to set IR allways on I have tryed alot of commands... like: /params.cgi?cmd=xxxxxxx But am not able to set IR allways on... Support sayes its not possible, but i still wounder if there is possible??? (the IR sensor is "flicking" at the end of the day... and its not cool.. My workaround now, is to "block" the IR sensor, but i would prefered a settings 7) - some expiriences I am able to use RTSP for stream CHxx to an app or blueiris. rstp stream url - :554/ch0_0.h264?ptype=udp Any other or better idea? - Protocol? I found the list of Ixx protocols... I wounder what protocol Foscam Fi860x and wanscam uses? (wanscam is responding with I12, but it does not work) woooow.. that was alot of questions I numbered them so is any1 have som feedback, please just reply to what you know )))))) Happy pre-Xmas.... Eddie

Hi, I am testing the Escam K104 and K108 , 4 and 8 channel I wounder.... 1. Is there any APP for direct access? They have a cloud app goolink.org witch uses a icloud protocol? and a danale.com witch uses a DANE protocol? I dont nothing about those protocols... I would like to hava a native app to connect direct to the NVR. The NVR supports RTSP (554) and RTMP (1935). I have testet by scanning with "ip cam viewer" on IOS with no luck.. First I would like to watch live video from the NVR. If possible it would be nice to watch playback as well.. Any tips any1? Greetings Eddie