phillipscctv

The current setting of your Pelco Spectra III dip switches are Pelco P, 9600 baud rate, PTZ address is #1. In order for you to control the PTZ via the DVR on screen display or client software you must match the above settings to your DVR. Example: DVR: Camera Address #1 Protocol Pelco P Baud Rate 9600 PTZ: Camera Address #1 Protocol Pelco P Baud Rate 9600 Please refer to sticker/label settings Switch #1 and #3. Switch #1 are for addressing, switch #3 are for protocols. if your DVR cannot support multiple protocols please post your question here again. Goodluck! Phil

Connect the RX+ and RX- of the BB53HD to your DVR RS485 (Pay attention to the polarity) RX+ go to RS485+, RX- go to RS485-. Now you need to configure your PTZ and DVR protocols. (disregard all the alarm inputs connections from BB53HD back box)