jack.agetro

All this problem has already fix.

Sorry guys haven't checking in for a while. I actually fix the problem by removing and replacing one of my Access Point device which seems to hang-up and cause problem with one of my switch that is connected to my TL-3424P. I got several switches and access points and it looks like one of my AP is faulty and affecting my network specially the IP camera's connected to the switch.

Any ideas guys?

Hello guys, I added 2 pcs of fan in my PoE switch and a fan in my NVR. It seems that it helps for about a few weeks, but right now I encounter again the same problem and same thing I just rebooted by NVR and PoE switch where my camera is connected. Any other ideas?

Hello guys, question how to estimate the data / internet bandwidth to be used in remote viewing of my cctv / ip camera. Example I have 16 ip camera 2 megapixel each. How much internet data I need to stream it remote view on my mobile device. Lets say per minute and hour. I need to calculate it so that I know how much data I need for my mobile internet plan. Thanks

Yes I did sir, AVH312PV is discontinued according to AVTECH website. I also change my recording and viewing settings. But when my HDD is almost full the problem happens it says system overloading in my AVH312PV and I can't do anything the system hangs up, so what I have to do is reformat my HDD again and its back working. My AVH516 the CPU usage is 100% but still functional and a lil bit slow I got 16 IP Cam with 2MP each.

UP for this hoping to see someone with the same issues and got a good solution.

Actually it disconnects different cameras, like for example it disconnects 1 camera then 4 cameras etc. etc. I think the camera is not the problem. I already reset my PoE switch and it made a little change for about a day w/o disconnection and then it disconnect again. So I reboot my PoE switch again and its good again then after that it disconnects again. I already check NVR and try to scan/search the camera, it finds the cameras IP but it doesn't connect back so I just have to reboot also my NVR in order to reconnects it again. It happens just in particular time frame when we don't have operations and the air condition is turned off it happens in the late hot afternoon about 3 hours everyday, that is why I suspect it might be heat issue on my data cabinet where my PoE switch installed, it doesn't have proper ventilation. But actually I just encounter these problems about 2 week now, before that I don't have any issues like that I never change anything before until now. Hmmm.

AVTECH NVR Problem. CPU Usage 100% and System Overloading. My NVR models are: - AVH516A - AVH312PV Any AVTECH user here?.

Hi guys, I got some issues regarding my IP Cameras 16 units connected in my PoE switch and to my NVR. I recently encounter problems about my camera's disconnection. What I do is I'll reboot my whole system the PoE Switch and the NVR itself. I'm not sure if it is about overheating or something. My NVR is updated to latest firmware version and got good ventilation while my PoE switch is installed in my data cabinet with not so good ventilation. These issues are just recently. Does anyone encounter similar problems? I'm planning to add cooling fan on my cabinet. Thanks

Any experience with Milestone Xprotect? I'm planning to migrate and try Axis. So far in the line of VMS, milestone is no.1.. Any thoughts?

Absolutely! The only thing worse than Arecont is the older GE stuff! I have 2 sites that I manage that are 1500+ Everything that dies gets replaced with Axis. New construction gets axis. The new Axis Q6114-E, Q6115-E, and the just released Q6128-E PTZ cameras are off the chain. And they are 1000.00 cheaper than the Q6042-E and Q6044-E PTZs. The Q6128-E is a 4k PTZ. The hospital I manage is all Avigilon. And that product has been flawless. Thanks for replying guys, so far AXIS has the more vote from the user. What about Axis compatibility with the third party VMS? What VMS have you use to manage Axis IP Camera? and it's flexibility in mobile viewing?

I haven't tried Axis yet, but looking at all your post/reply I think I need to try it. These are the brands that I have tried: 1. Hikvision 2. AVTECH 3. Foscam 4. Escam I can't tell you guys that those brands are the best because until now I encounter problems with their products, it's like those are the only available products that I used from my work.

Tell me your experience with the IP Camera Brand that you are using. When it comes to reliability, application and support.

It seems that no one from AVTECH is in this forum. Too bad for the support. This actually another problem. No support from AVTECH team.