alverman

You have tried to use genius vision community edition? It is free software and can handle up to 16 cam, allows you to do even coffee with your cameras and motion also it works great !! Hello, Alberto

From now on I organize myself to make a mini pc with Genius Vision Comunity version. With this software you handle any camera with an advanced motion system. The software is a little complex, but rather lose the time with a powerful software with a hardware combination, especially software, poor. Alberto

I never lost so much time to the configuration of anything !! The motion of this machine is wrong and never go. The motion is not related to onvif protocol or to the fact that it is implemented in the camera. NVR is the software that I have to do and this nvr it does !! it is useless to appeal to the fact that the manufacturers do not follow to the letter the onvif protocol. I have a DVR on which I connected two simple analog cameras and motion works perfectly because the cameras do not have the motion but only because the DVR has in motion !! It is useless to tell me that with what it costs this NVR has a free software. This is the result, I spend for an hardware that, given its free software does not do what it should, so in the end I have a little box unusable. I predict that soon there will be hundreds of on ebay for sale of these nvr used. Before you sell this NVR and before time savings. Who spends less spends more. Alberto

Good evening, from where you downloaded the Additional Protocols Thanks, Alberto

Good evening everyone. I add a further message to this useless thread. Useless because it solves or settled only 0.001% of the problems of all of us. There is little to say: These machines can not do what they should. it is useless to appeal to the fact that manufacturers of cameras to customize how their protocol onvif. Just try any type of permit management software IP video cameras to be able to fully control them, including the fateful motion. I speak of Genius Vision: find the cam onvif imposed immediately and more areas of motio and everything works the first time. Not much else to say except: needless to throw money (AND TIME) for these phantom mini NVR put into different boxes but with the same common problems. The design of these NVR is wrong to base Alberto

Practically is equal to this: http://www.urcctvstore.com/P_POE_NVR.html The only difference being that the circuit breaker is above the connection lan

I bought this NVR: www.amazon.it/gp/product/B01410VCT2?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00 In the description it says N6100-8EHP/48 !! The version currently installed on my NVR V4.0 [20150124] Trying to check on http://www.urcctvstore.com/Download.html not find a firmware for this model. Does anyone know where to download? I have two dome Foscam 9298P-V2 but it seems to work on motion detection. Does anyone know if this problem is solved? Thanks, Alberto

Hi, I search an app for iPhone for control my nvr outside of my lan. I have goolink but only work in lan. Thanks, Alberto

Good morning, I'm trying to insert a cam protocol rtsp but when I insert the address is displayed incorrectly and the cam is not seen. I insert: rtsp://10.0.0.50:554/live/mpeg4 when save I see: rtsp://rtsp://:554/main:554/main Is a firmware problem? Thanks, Alberto

Good morning, I bought this nvr: http://www.amazon.it/gp/product/B01410VCT2?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00 In the description there N6100-8EHP/48 It may an NVR N6200-8EHP / 48 instead N6100-8EHP/48 ? In system info of my NVR I see: V4.0 [20150124] There is a new firmware for this nvr? Another question on the configuration. In the network settings have two nic. I configured the nic of lan (nic2) with 10.0.0.60 I configured the nic of the cam (nic2) with 10.10.0.1 As the IP address is assigned to the cam? I have to assign the IP address manually or automatically assigned to each NVR network 10.10.0.x? Thanks, Alberto