JBGUYOT

Well, i've discovered an asian web site of a supplier of motherboards for NVR. they offers to update your material with update: http://www.xiongmaitech.com/en/index.php/product/product-list/4/0/1 What is the mini nvr (if it is present in the list)? perhaps, a new update......

Hello Patmas, first, do you try recovery file for your problem? Do you have files of release 20150808 for N6200-8E ? I would like them.....thanks

Hello Patmas, Can you confirm that the i12 protocol was working perfectly with the ESCAM QD900 cameras?

Hey Patmas, You've upgraded the firmware of your MiniNVR from 20150808 to the latest 20160707 What about 20151231_Firmware? Does 20150808's firmware is OK for motion's detection with ESCAM QD900?

Ok Thanks Patmas

If you haven't found it yet, go to "System Management" > "System Update", there you should get a 'choose file' button that allows you to browse to the firmware file and upload it by clicking the 'update' button. thanks for your reply but i don't see 'remotely's notion' in your explanations (it is a local update).

hi, i've read that we can install firmware remotely (thru Browser) does somebody can tell me how to install firmware remotely ? Thanks a lot

Hello, I received my NVR DIGOO DG-XME. It seems to have an Hi3520d processor. I configured my 3 IP cameras ESCAM Brick QD900 WIFI. But after a few days, I noticed a few dysfunctions: - motion detection zone settings: 'failed to get the configuration' - overwrite record history A desolate silence on the part of the support Can be an alternative firmware? Thanks for your help.

You are hard with me..... Let us reframe the situation. The DIGOO has an HI3520D and costs $ 25 (produced by China) The mini NVR has an HI3520 and costs $ 35 (produced also by China?) Most of these materials are Chinese AND produced in Shenzen. Much similarity material and yet a lot of ink sank on the mini NVR You do not want to be more constructive, tom?

I expected another answer. An answer like 'you can use an alternative firmware such as this one ...' Thank you for your participation

Nobody to help me?

Try to set a backup's directory with a simple name without space,(,),.......

@lesterb: and your motion.does it work fine?

Hi, after checking my NVR's system, i discover that my firmware's date is 20150808 (the last?) so i just update my system with : 20150808_Firmware_Enable_RTSP I connect my camera ESCAM brick QD900 WIFI, first setup on ONVIF, on RTSP. Motion detection has the same problem. i've the error message: ERROR DURING SAVING PARAMETER Nothing has been changed on a motion detection system that works, is anyone know what file is stored in this setting? I might be directly edit the file? Best regards

Hi, after checking my NVR's system, i discover that my firmware's date is 20150808 (the last?) so i just update my system with : 20150808_Firmware_Enable_RTSP I connect my camera ESCAM brick QD900 WIFI, first setup on ONVIF, on RTSP. Motion detection has the same problem. i've the error message: ERROR DURING SAVING PARAMETER Nothing has been changed on a motion detection system that works, is anyone know what file is stored in this setting? I might be directly edit the file? Best regards

thanks patmas, some cameras has different command line using RTSP or HTTP like this: - rtsp://IPADDRESS:554/cam[CHANNEL]/h264 - http://IPADDRESS:554/videostream.cgi?user=[uSERNAME]&pwd=[PASSWORD]&resolution=32&rate=0 What is the difference? Does the firmware patch enabling RTSP works fine with HTTP:\\ command line? Br

Hello everybody, i've read all the 70 pages of this post. Interessant! I’ve just bought my MINI NVR8 (N6200-8E). I will try to connect all my cameras one after one. The first I’ve tried to connect is an ESCAM Brick QD 900 WIFI. [ONVIF]. After some fight, it seems to work fine. Cool! BUT, motion's zone and sensibility's setup are not saved when i leave the setup (reading this post, it seems it is a problem of ONVIF's cameras...) I’ve tried the 2th: a NEO COOLCAM NIP-26 HD 720p H.264. it seems to be a FOSCAM's clone that can use RTSP protocol. The NVR don't detect it on my lan. so, i've.....today....2 questions: - i've read that we can use RTSP protocol. HOW TO SET RTSP protocol? - what can i do to retrieve saving of motion's zone (for ALL protocols)? Thanks for your help Best regards