Jump to content

learjet23

Members
  • Content Count

    1
  • Joined

  • Last visited

Everything posted by learjet23

  1. Hi, I'm a total noob when it comes to connecting these camera's could someone please help me diagnose my problem. Camera's: http://www.ebay.ca/itm/1200TVL-Outdoor-Sony-Cmos-Pan-Tilt-P-T-Dome-Night-Vision-IR-Security-CCTV-Camera-/371418300307? ( I know they are cheap and probably crap) DVR: Digimerge DH200 4channel I'm trying to connect two of these Pan/tilt cameras to this DVR and have the ability to focus and pan horizontally and vertically. initial camera setup : set dip switch for camera 1 to channel 12 camera 2 to 13, set to 2400 baud The problem I'm having is one camera pans horizontally 350deg but will not pan vertically at all and the other camera will pan vertically 90deg but not pan horizontally...I've connected both to suitable power, rs485 outputs from both cameras have been merged +/- and plugged into back of dvr rs485 Tx+/-. In the DVR menu I've selected Pelco D 2400 baud and set camera one to channel 12 and camera two to 13. Any ideas what could be happening here?
×