lumberslayer

Same version3.01 Along with a new motherboard. Was overnighted, so up and running! It was a combination of motherboard and card! The motherboard sees that card but the pci would only work when it wanted to as well! Cheap PC Chips board was in it before now running on a Asus A7N8x-e deluxe!

Well threw all the trouble shooting all correct drivers etc. Boils down to a pooched Geovision card. Sending it back for a new one!

Initial the company name, never know i guess.

I will just raise some hell, when i call Flordia tomorrow... Keep ya posted...

No need to check the update tool! I don't have a Sic USB key, nor do i have the USB dongle. My card is a D type. The software i can run max is 6.1.0.3 Remember my card version is D type version 3.01 cards 3.30 and newer can update no problems.

i BOUGHT THE SYSTEM LAST YEAR BUT THE CARD WAS A 2004 MODEL SO I GOT A BETTER PRICE! SO HOW DO I GET THIS KEY THAN SINCE THE SUPPLIER I GOT IT FROM WILL OBVIOUSLY HAVE IT? cAN HE JUST SEND ME THE FILE SO I CAN FIRE IT BACK UP? I GOT THE BOOK JUST NO SOFTWARE.

Could it be a pirat copy you have, so that when installing unmodified Software you get that error? JD Not a pirated card! The enitre system was $2800. All legit. Like i said the whole system was installed with the software and was not given any geovision CD. What key are you talking about usb or parallel? My card is a gv800-16 Version 3.01 so i highly doubt it had a key for it than it is a 2004 card! The software was legit on it before! Just from the crash something went bonkers. Hence i reformatted the OS drive and tried to reinstall. That is when i had issues! The drivers are the correct ones, XP even sees the Geovison GV-800. What does keypro mean anyways? Is there a reg file that needs to be installed before it works? Kinda at a loss here. Worst case scenario is i have to call Flordia in the AM where i bought the system from. Any other ideas?

Why am i getting this error when the proper drivers and program are installed? Is there a key reg that was installed in my system during the install? This system was all pre loaded.

i TRIED V 6.05 SAME THING...

I have a Geovision GV800-16 D Type card Ver 3.01. Here is my problem.. The power supply fan seized which caused XP do do various hard reboots. An screwed up the OS. I reinstalled the OS. And installed the 5.4 drivers, followed by the main geovision software 5.4. All the drivers had been installed, rebooted first than the main geovision software was applied. Now when i try to launch the software. I get keypro error, check drivers. The card is installed an seen in XP, with all the drivers. Am i doing something wrong? for the GV800-16 version 3.01 card? Which software do i need for 3.01? Or any ideas? This system was fine an stable before for 7 months. The motherboard etc is not the problem here. Any gurus with some advice? My store has no security now since my system went down. An soonest i can contact somone is on monday in flordia where i bought this system. I really need it fixed before than! Thanks